LO Application for VHF LOG and KM Rover


Throw away your paper notes used to remind you of dial offsets and transverter crystal offsets. This application is Transverter Local Oscillator and IF Offset Software.

VHF LOG and KM Rover will output IF and offset data on each band. For microwave transverters using PLL LOs, the multiplication factor and reference frequency are entered into LO`s datafile. At the time of the QSO, you read the 90-110 MHz reference on an accurate VHF counter and enter it into the logger. The exact IF frequency is displayed. Now all you need to do is peak the antenna. When asked to go to .165 on a band for example, you enter F165 into the logger and the IF for .165 will be displayed for that band. Also, keep track of your favorite beacons and display the beacon indicated dial frequency while logging.