KM ROVER32 Revision History        [ Hit <F5> to refresh your browser ]

1/2008 v3.51
° Added CATEGORY-OPERATOR, CATEGORY-STATION, CATEGORY-TRANSMITTER and CATEGORY-POWER to
  the Cabrillo file instead of just the CATEGORY field.
° Changed ARRL category selection from `Rover` to `Rover Limited` and `Rover Unlimited`.
° To print a grid map, turn ON the printer check-box and use <F5>.
° This version works on Microsoft Vista OS. You may need to set permission to run programs
  by right-mouse clicking the executable, and selecting `Run As Administrator`.

6/2007 v3.5
° Added support for 5 Spring Sprints - uses `Classic Rover` multiplier scoring - not the
  ARRL method. 6-digit grids can be used throughout and are saved to log files.
° Older sequential Ini file {rover32.ini} changed to a Windows control format file
  {KMRoverControl.ini}, which is easier to read (and edit if necessary).
° All Cabrillo band designators 1296 and above now changed to 1.2G, 2.3G, 24G,...300G
  for the ARRL contests.

9/2006 v3.4
° COM1 and COM2 are both available for the GPS interface. When COM port CW is used along
  with the GPS, different ports must be used.

11/2005 v3.3
° Minor changes to CW keyer and DVK ini data.
° Re-sized some output windows. Laser QSOs now identified as `300` (GHz) in Cabrillo file.
° Added contest selection of Generic Sprint.

03/2005 v3.2
° Third party resizing control supports any video resolution - allows the user to resize
  the screens as desired. Size and position settings are saved.
° Auto UTC offset function from PC`s system Time Zone setup.
° Added some code to help printing to Laser and Ink Jet printers.

03/2005 v3.14
° Call lookup now uses the local club datafile [cklist.dat] and new local area file [ck2list.dat]
  to display the operator`s name. /R is stripped off the entry before searching datafiles.
° Automatic log file back-up can be written to any drive - even USB flash drives.
° Fixed DVK cancel when using the RIGblaster footswitch or mic cancel.
° Modified the DVK in the RIGblaster mode to work with 16-bit sound cards. The 16-bit play time
  was incorrectly calculated, which added an extra delay when using the repeat function or PTT.

08/2004 v3.13
° CW/PTT can be interfaced on COM1 with the GPS connected - use a `Y` serial cable.
° The GPS data stream is interrupted during CW transmissions.
° The compass now works when `Manual offset` is turned `Off` and the calculated beam heading
  remains displayed in the heading box.
° Changed Cabrillo `903` designator to `902`.

06/2004 v3.12
° Added the <GRID> and <2GRID> keywords to CW <F1> message - to send your current grid square.
° Long-filenames for LOGs are OK now (keep them a reasonable length so they fit in the display).

01/2004 v3.11
° Added software swap switch for DTS and RTS COM port connections for CW/PTT.
° Added DVK over-ride mode that allows cancelling a playing wave file and the <F12> repeat function.
  DVK over-ride also provided by mic click and footswitch click when a RIGblaster is used.
° CW is available on LPT1-17. Band change encoder has outputs to LPT1 on all bands.
 
01/2004 v3.1
° Added transverter IF/LO offset display, like VHF LOG. Also displays favorite beacon frequencies.
  The application LO.exe is used to generate the datafiles.

10/2003 v3.0 - 32-bit version, compiled with Microsoft VB v5.0. Same as the 16-bit logger w/GPS,
plus BCD decoder output to LPT1 to switch transverters, amplifiers and antennas. Has `GPS tracking`.
             
Do [right mouse - back] or click your browser`s <BACK> button to return.