32-bit KM Rover Logger

° Free software runs in Windows ME, W2K, NT, XP & Vista. Has post contest log entry.
° Screens can be resized for full screen display, even on your 1024 x 768 laptop.
° Logs the `Big-4` ARRL VHF/UHF contests and generic Sprints in the Rover category.
° GPS interface shows heading to target while mobile or at fixed site.
  · Rover route tracking function.
  · USB interfaced GPS works too.
° Distance and bearing from real time 6-digit grid calculations, and from 6-digit lookup.
° Rotator headings to 6-digit targets, while driving. Auto and manual rotator offsets.
° Allows dupe QSO entries, logged with zero points. Logs Rover QSOs as Call/R.
° DVK - Memory and repeat w/wave files and PTT control.
  · Call the working station in your voice.
  · Full DVK over-ride functions - supports RIGblaster mic click.
° CW keyer - Memory and keyboard CW, w/repeat and PTT.
  · Software swap of DTR and RTS COM connections.
  · Provides CW keying to LPT1-17.
° Logging done without the mouse - see Keystrokes/Shortcuts in the HELP file.
° Transverter offsets, IF frequency and dial calibration delta is displayed.
° Writes an ASCII Log file or Cabrillo file to be E-mailed to the sponsor.
° Auto UTC offset. Just in case, adjust the UTC hour in your log using UTC Time.
° Controls an LPT band decoder for transverter/antenna switching. LPT decoder kits are available from Steve Kerns - N3FTI on qsl.net or n3fti at yahoo dot com. Important: Read this consideration about hot-switching.
° Uses `good calls` {logsort.dat}, local club file {cklist.dat} and frequently worked stations file {ck2list.dat} for data lookup. The master VHF datafile {vhf4k.adi} can be updated/created from your own Cabrillo logs.
° Displays US grid maps.