Last modified:
Figure 1 shows the Tank-Latch's Striker-Plate affixed front and center in the robot's 'Tank Well'.
Figure 1. Striker-Plate, Mounted
Two each #2 Phillips-head, TFS3x1.4,8LG, screws retain the plate. When those screws are removed, and the plate lifted, there is only the continuation of the outer surface of the upper-chassis to be seen.
If you wish to return to the main (Scooba Technical Comments) document, click Main
Otherwise you may reverse travel the link that brought you here by pressing the 'Backspace' key.
This page is currently maintained by G. Plews