From corrado-l-owner@teleport.com Wed Jun 14 07:45 PDT 1995 Received: from mailer by fshpp1 with SMTP (1.38.193.4/16.2) id AA07485; Wed, 14 Jun 1995 07:45:55 -0700 Return-Path: Received: from desiree.teleport.com by UG.EDS.COM (PMDF V4.3-10 #4) id <01HROSQG21QO006OGE@UG.EDS.COM>; Wed, 14 Jun 1995 07:43:19 -0700 (PDT) Received: (from daemon@localhost) by desiree.teleport.com (8.6.10/8.6.9) id HAA04298 for corrado-l-outgoing; Wed, 14 Jun 1995 07:39:13 -0700 Received: from gw2.att.com (gw1.att.com [192.20.239.133]) by desiree.teleport.com (8.6.10/8.6.9) with SMTP id HAA04290 for ; Wed, 14 Jun 1995 07:39:08 -0700 Received: from garage.UUCP by ig1.att.att.com id AA11230; Wed, 14 Jun 95 10:38:46 EDT Date: Wed, 14 Jun 1995 10:38:00 -0400 From: cjh@garage.att.com (c.hapeman) Subject: heated side mirrors Sender: owner-corrado-l@teleport.com To: corrado-l@teleport.com Reply-To: corrado-l@teleport.com Message-Id: <9506141438.AA11230@ig1.att.att.com> X-Envelope-To: JAN@FSHPP1 Content-Transfer-Encoding: 7BIT Original-From: garage!cjh (c.hapeman) Precedence: bulk Status: RO i mentioned something about the heated side mirrors being on all the time last week but no one else heard of it. well, i dug through some old material and found the following xeroxed information which i based my original comment on. christopher hapeman cjh@garage.att.com '90 stage I, moda m1, white g60 EPOS feedback______product information Corrado HEATED REMOTE SIDE MIRRORS Contrary to the wiring diagram #89-18 dated march 31, 1989 and the text in the Owner's Manual, the remote heated mirrors are *not* powered through the rear window defogger switch. The mirrors heating elements are connected to the ignition circuit (Terminal #15) and are powered whenever the iginition is switched on. This electrical hook-up has no effect regarding the alternator load balance during driving or on the durability of the heating element. Due to the PTC ( PTC - positive temperature coefficient) resistor, the initial current draw tapers off to approximately 300 to 400 mAmps, after the mirror heater has reached a temperature between 95 degrees and 105 degrees F (35 degress and 40 degrees C). Please do not alter the wiring connections required for this function. 11/30/89 ADVANCED INFORMATION 97.1 "TECHNICAL INFORMATION FORRTHCOMING"