Subject: Re: info on vw mounts Date: Tue, 05 May 1998 16:56:15 -0700 From: vwhead@nbnet.nb.ca To: Jan Vandenbrande References: 1 , 2 , 3 , 4 For the mono wiper conversion I cut the arm on the wiper motor and made it like a 1/4" longer, then I took a 1/4" out of the arm on the end on the wiper arm it self. It's really easy for someone who knows how to weld. The park position of the wiper is right in the middle of the windsheild. I'm sure you can get it to park anywhere you'd like. I get almost a full sweep, more than any other kit you can buy! It took alot of messing around but it's pretty easy. I also had to cut the small ball off of the arm on the motor. Something else, the arm that goes between the motor and the wiper I had to cut in half and use a different end from the outher wiper arm. The whole kit cost me about $20 worth of labour at my local machine shop. Good luck, let me know how you make out and if you need anymore info please let me know. Best regards, Pat 90 Jetta 16V 2.0L 15.60@89.6mph My homepage address is here http://www.fortunecity.com/silverstone/fiat/59/index.html