HSM 1984

More on Milling With a Drill Press               CLARKE, THEODORE M               HSM'84:J/A10

Returning The Tailstock On Center                              HSM'84:J/A16

More on Alignment                           HSM'84:J/A17

A Toolpost Grinder            DEAN, JOHN      HSM'84:J/A18

Speeds And Feeds Parts 1-3             HOFFMAN, EDWARD G.               HSM'84:J/A20,S/O20,N/D18

Buying Used Welding Equipment    HUNT, CHARLES K.        HSM'84:J/A24

Temporary Self locking Stub Mandrel           DUCLOS, PHILIP              HSM'84:J/A28

Screwdriver Blade Grinding Jig       PLANK, KIM E.  HSM'84:J/A35

Modifications to a Maximat V-8 Lathe          MARSHALL, DAVE          HSM'84:J/A36

Oxy-fuel Cutting Guide Jig              PHILLIPS, ORLEY            HSM'84:J/A42

A Toolpost Problem Solver             DEAN, JOHN      HSM'84:J/A55

How to Use the Vertical Milling Machine    McLEAN, FRANK             HSM'84:J/A56

Boring Bars Part I-II          KOUHOUPT, RUDY         HSM'84:J/A58,S/O56

Product Review: Emco Maier FB 2 Milling Machine               HOFFMAN, EDWARD G.               HSM'84:J/A6

Threading on the Lathe      WASHBURN, ROBERT A.              HSM'84:J/A60

A Thin Slice of V-Block    DEAN, JOHN      HSM'84:J/A63

Good Housekeeping Parts 1, 2        HOFFMAN, EDWARD G.               HSM'84:J/A64,S/O60

Product Review: Criterion Boring Head        HOFFMAN, EDWARD G.               HSM'84:J/A8

Product Review: Northwestern Clamping Kit              HOFFMAN, EDWARD GHSM'84:J/A8

Q & A    NIERGARTH, RAY            HSM'84:J/F12,M/A12,M/J12,J/A12

...Or Stand On Your Head                 HSM'84:J/F16

For A Good Look                              HSM'84:J/F16

Single Point Threading                     HSM'84:J/F16

Thar She Blows!                 HSM'84:J/F16

Screw Thread Calculations Parts 2-4             HOFFMAN, EDWARD G.               HSM'84:J/F18,M/A20,M/J20

From the Editor   RICE, JOE            HSM'84:J/F2,M/A2,N/D2

Shop of The Month            FUNK, J.C.          HSM'84:J/F20

Gas Tungsten Arc Welding Parts I, II             HUNT CHARLES K.         HSM'84:J/F22,M/A26

Reconditioning a Lathe Parts I-VI   BLOOM, HARRY              HSM'84:J/F24,M/A40,M/J48,J/A49,S/O42,N/D48

Weldments Can Replace Castings                  HSM'84:J/F31

Conversion of a Gear-driven Shaper to Hydraulic Drive            CLARKE, THEODORE M.              HSM'84:J/F36

Cutting Fluids and Compounds        MARCUS, JOHN, Ph.D.    HSM'84:J/F40

Column Storage Box for a Drill Press           VAUGHN, W. B.HSM'84:J/F44

Assembly                            HSM'84:J/F46

Practical Design Hints Part IV Assembly      STRASSER, FREDERICOHSM'84:J/F46

Compressed Air Motor Parts I-III   KOUHOUPT, RUDY         HSM'84:J/F48,M/A58,M/J58

Sharpening Two-Lip End Mills        McLEAN, FRANK             HSM'84:J/F50

Lathe Turning Tools           WASHBURN, ROBERT A.              HSM'84:J/F52

Fire Safety Parts 3-5          HOFFMAN, EDWARD G.               HSM'84:J/F56,M/A64,M/J63

Product Review: Fisher 5" Sine Bar               HOFFMAN, EDWARD G.               HSM'84:J/F8

Product Review: SPI Space Block Set           HOFFMAN, EDWARD G.               HSM'84:J/F8

Product Review: Emco Maier Maximat Super II         HOFFMAN, EDWARD G.               HSM'84:J/F9

Product Review: Sears 15 l/2'' Drill Press    HOFFMAN, EDWARD G.               HSM'84:M/A10

Product Review: Fisher "Pee Dee" Thread Measuring Wires    HOFFMAN, EDWARD G.               HSM'84:M/A11

A Bit of A Tip                     HSM'84:M/A16

Milling Advice (Chips and Sparks)                 HSM'84:M/A16

Extra Length Combined Drill and Countersinks          YAMAMOTO, MICHAEL T.           HSM'84:M/A18

Center Test Indicator         BROCKARDT, FRANK G.              HSM'84:M/A19

Every Pot Finds Its Own Lid            LAUTARD, GUY               HSM'84:M/A24

A Practical Suds Pump      PASSINO, KEITH E.          HSM'84:M/A28

Sliding Bandsaw Vise         MERRIFIELD, ED             HSM'84:M/A35

An Automatic Parallel       KOUHOUPT, RUDY         HSM'84:M/A36

Spacing Drill Guide Makes It Easy  DEAN, JOHN      HSM'84:M/A39

V-Blocks Quickly Made    DEAN, JOHN      HSM'84:M/A43

Lathe Chip Shield               BERGER, JIM     HSM'84:M/A44

Don't Fake A Casting-Make A Casting Parts I-III                        HSM'84:M/A50,M/J52,J/A52

Tool Holder Retainer         BIDDLE, H.T.      HSM'84:M/A55

How to Machine an Angle Plate      McLEAN, FRANK             HSM'84:M/A56

Boring & Lathe Measuring Tools    WASHBURN, ROBERT A.              HSM'84:M/A60

Heavy-Duty Centers           PARSHALL, CHET            HSM'84:M/A63

Product Review: Dupli-Carver Band Saw      HOFFMAN, EDWARD G.               HSM'84:M/A8

Height Gage         JENKINS, LEWIS J.          HSM'84:M/J10

Q & A    HOFFMAN, EDWARD G.               HSM'84:M/J12,J/A12,N/D22

More on a Gear-Driven Shaper Conversion  CLARKE, THEODORE M               HSM'84:M/J16

A Handy Combo-Mallet and Knockout                         HSM'84:M/J18

Trueing Trick                      HSM'84:M/J18

Smooth Surfaces                HSM'84:M/J19

Rapid Machine Tapping Drillpress  ROUBAL, WM. T. (TED}, Ph.D.     HSM'84:M/J20

Building a Portable Vise Bench       HUNT, CHARLES K.        HSM'84:M/J24

Rotary Milling Table Parts I, II        KADRON S. F.    HSM'84:M/J28,J/A30

A Large Steady Rest from the Scrap Pile      BARBOUR, J. O., Jr.         HSM'84:M/J35

A Milling Machine for Your Lathe Parts I-III              SNYDER, JOHNHSM'84:M/J36,J/A44,S/O36

Drawing Up A Bargain       LAUTARD, GUY               HSM'84:M/J45

Machining Thin Disks and Rings     JOHNSON. D. E., P. E.      HSM'84:M/J50

Flycutters             McLEAN, FRANK             HSM'84:M/J56

Lathe Measuring Instruments           WASHBURN, ROBERT A.              HSM'84:M/J60

Product Review: Sears Bench Grinder           HOFFMAN, EDWARD G.               HSM'84:M/J8

Product Review: Mitchell Abrasive Cords and Tapes  HOFFMAN, EDWARD G.               HSM'84:M/J9

Product Review: Starrett Trammel Set          HOFFMAN, EDWARD G.               HSM'84:M/J9

A New Year Message                        HSM'84:N/D12

A Sensitive Level                              HSM'84:N/D16

Cross Slide Mounted Drilling Machine                        HSM'84:N/D17

Holding Small Objects      TAFT, GEORGE L.            HSM'84:N/D17

How Would You Make This Part?   HOLDEN, D. W.HSM'84:N/D31

Fabricating the Tumbler Link           HOLDEN, D. W.HSM'84:N/D32

A Bit of Inspiration            LAUTARD, GUY               HSM'84:N/D34

Five-Layer "Lazy Susan" Drill Index               GASCOYNE, JOHN          HSM'84:N/D36

Concave and Convex Radius CutterJONES, BRUCE  HSM'84:N/D40

Making the Home Shop Pay             ODER, JOHN W.               HSM'84:N/D45

Fear Neither Sphere Nor Hemisphere           DEAN, JOHN      HSM'84:N/D50

Proper Grounding of Power Tools  WIREMAN, TERRY          HSM'84:N/D52

Swaging Down a Copper Pipe Elbow             LAUTARD, GUY               HSM'84:N/D54

Drilling and Tapping Hints               McLEAN, FRANK             HSM'84:N/D56

Milling Accessories Part I               KOUHOUPT, RUDY         HSM'84:N/D58

The Basic Approach to Using the Milling Machine     WASHBURN, ROBERT A.              HSM'84:N/D60

Shop Layout Part 1             HOFFMAN, EDWARD G.               HSM'84:N/D64

Product Review: Dillon Mk III Welding & Cutting Torch         HOFFMAN, EDWARD G.               HSM'84:N/D8

Product Review: Maier Lathe Chucks            HOFFMAN, EDWARD GHSM'84:N/D9

Clamping Work to the Mill Table    TIMM, HAROLD               HSM'84:S/O10

Computerizing Machine Shop Calculations                 HSM'84:S/O14

Use Your Hands                 HSM'84:S/O15

Double-Stick Rug Tape Makes Tough Easy                  HSM'84:S/O16

Double the Capacity of Your LatheBARBOUR, J. O., Jr.         HSM'84:S/O18

A Make-Do Surface Grinder Parts I, II          WALKER, RICHARD B.   HSM'84:S/O24,N/D24

Making an Automatic Feed for a Milling Machine      REICHART, JOHN            HSM'84:S/O31

Triplex   SCHEFER, E. I.   HSM'84:S/O34

Construction & Use of the Lathe Carriage Stop          JOHNSON. D. E., P. E.      HSM'84:S/O39

A Temporary Aluminum Furnace     DUCLOS, PHILIP              HSM'84:S/O44

Ramming the Mold for a Metal Casting         LEWIS, JAMES R.             HSM'84:S/O46

External Threads Part 1     McLEAN, FRANK             HSM'84:S/O50

Selecting a Milling Machine            WASHBURN, ROBERT A.              HSM'84:S/O60

Product Review: Darex M3 Drill SharpenerHOFFMAN, EDWARD G.               HSM'84:S/O8

Product Review: S-T Industries 12" Height Gage        HOFFMAN, EDWARD G.               HSM'84:S/O8