HSM 1987

Product Review: Optical Locator    RICE, JOE            HSM'87:J/A11

Cutting the Rust                  HSM'87:J/A16

Demagnetizing Tools                        HSM'87:J/A16

Everything in Its Place                      HSM'87:J/A16

Finding Material                 HSM'87:J/A17

Homemade Center Punch                 HSM'87:J/A17

Long, Useful Life                              HSM'87:J/A17

Removing Saw Burrs on Tubing                      HSM'87:J/A17

Starting the Die Squarely                  HSM'87:J/A17

Tightening Metal Pins or Studs                       HSM'87:J/A21

Machinist's Desk Lamp, A Parts 1-2              LAUTARD, GUY               HSM'87:J/A22,S/O34

Of Auctions and Industrial Sales      WALKER, RICHARD B.   HSM'87:J/A36

Vise for Small Parts, A      DUBOSKY, ED   HSM'87:J/A42

Electric Motors   LAMPARTER, ROBERT W.            HSM'87:J/A47

Improved Atlas 6" Lathe Gear Cover             LUCHESSA, C. M.             HSM'87:J/A52

Protect Your Mill from Shavings    McLEAN, FRANK A.        HSM'87:J/A56

Building a Rotary Table Parts 1-3   KOUHOUPT, RUDY         HSM'87:J/A57,S/O58,N/D62

Using Chisels and Punches              HOFFMAN, EDWARD G.               HSM'87:J/A64

Product Review: Omni-Post Quick Change ToolpostHOFFMAN, EDWARD G.               HSM'87:J/F14

Hard Face Welding of a Cutting Edge Lip                    HSM'87:J/F19

Keeping the Dust Down                    HSM'87:J/F19

Shims for the Faceplate                    HSM'87:J/F19

Keeping a Jacobs JT 33 Chuck on the Spindle                            HSM'87:J/F20

Protecting Cutting Edges                 HSM'87:J/F20

Source of Machinery                        HSM'87:J/F20

Book Review: The Basics of Firearms Engraving     COFFIELD, REID              HSM'87:J/F22

Q&A                     HSM'87:J/F23

Q&A      LEWIS, JAMES R.             HSM'87:J/F23,M/A20

Q&A      BLOOM, HARRY              HSM'87:J/F24,S/O14

Machine Shop Calculations, Dimensions and Tolerances Parts 1-6        HOFFMAN, EDWARD G.               HSM'87:J/F26,M/A17,M/J16,J/A18,S/O17,N/D19

More Reconditioning a Lathe          BLOOM, HARRY              HSM'87:J/F30

Freehand Twist Drill Sharpening     DREWNIAK, JOSEPH A.HSM'87:J/F34

A Mini-course in Orthographic Drawing Techniques, Parts 1-4              WASHBURN, ROBERT A.              HSM'87:J/F50,M/A47,J/A54,M/J42

Time for an Overhaul Parts 1-3       KOUHOUPT, RUDY         HSM'87:J/F54,M/A53,M/J46

Making a Mold Using a MatchplateLEWIS, JAMES R.             HSM'87:J/F56

Personal Safety Equipment              HOFFMAN, EDWARD G.               HSM'87:J/F64

Mitutoyo Tool Kit              HOFFMAN, EDWARD G.               HSM'87:M/A12

Book Review: The Springfield M1903 Rifles             LAUTARD, GUY               HSM'87:M/A13

Grinding Wheel Arbors                    HSM'87:M/A14

Notes on Dividing                             HSM'87:M/A14

Chatter-free Radius Turning                            HSM'87:M/A15

Cleaning Magnets                              HSM'87:M/A15

Micrometer Mount                           HSM'87:M/A15

Machining Aids for a Machine Lathe             LEWIS, JAMES R.             HSM'87:M/A22

A Small Demagnetizer/MagnetizerLONGLEY, FRANKLIN A.              HSM'87:M/A25

Spindle Work Stop, A        MARX, ALBERTO            HSM'87:M/A26

Collets for Your Lathe      REISDORF, GARY F.        HSM'87:M/A28

A Puzzle               REICHART, BILL              HSM'87:M/A32

Cutter Bit Grinding BlockJOHNSON, D. E.HSM'87:M/A44

Machining Thin Plates on a Vertical Mill      McLEAN, FRANK A.        HSM'87:M/A56

Personal Safety Habits      HOFFMAN, EDWARD G.               HSM'87:M/A64

Accurate "U" Bolts                            HSM'87:M/J14

Electric Edge Finder                         HSM'87:M/J14

Getting the Angle                              HSM'87:M/J14

Ancient Chinese Hoist                      HSM'87:M/J15

Q&A      SELTER, PAUL E., SR.     HSM'87:M/J19

Helical Springs Part 1-2    HIRAOKA, KOZO             HSM'87:M/J20,J/A30

Pipeline to Prosperity       BROWN, MIKE  HSM'87:M/J32

Watch Repair in the Home Machine Shop     ROUBAL, TED    HSM'87:M/J37

Shop of the Month             GODDARD, LARRY         HSM'87:M/J41

Making an Angle Plate in the LatheHANCOCK, C. H.              HSM'87:M/J45

Cuttlebone Casting             LEWIS, JAMES R.             HSM'87:M/J48

Foundry—Don't Fake a Casting Ä Make a Casting      LEWIS, JAMES R.             HSM'87:M/J48

Machine Guards  HOFFMAN, EDWARD G.               HSM'87:M/J64

Top Slide Improvements                   HSM'87:N/D16

Arc Stabilizer                      HSM'87:N/D17

Ceramic Cutting Tools                     HSM'87:N/D17

Q&A      SMITH, TIM        HSM'87:N/D17

Tool Block                          HSM'87:N/D17

Bit of Inspiration, A           HOLEN, D. W.    HSM'87:N/D22

View Camera, A   HOLEN, D. W.    HSM'87:N/D22

How to Deal with Cranks and Eccentrics       JENKINS, DAN   HSM'87:N/D24

Patterns and Molding Procedure Parts 1-6   GINGERY, DAVE              HSM'87:N/D30, HSM'88:J/F30,M/A40,M/J36,J/A38,S/O37

Measurement for Taper Turning      FELLER, E. T.     HSM'87:N/D50

Sharpening Small Drills     ROBINSON, TREVOR      HSM'87:N/D51

Simple Centering Gage      NORMAN, ROBERT         HSM'87:N/D52

The Surface Grinder, Parts 1-4        WASHBURN, ROBERT A.              HSM'87:N/D56, HSM'88:J/F51,M/A48,M/J52

Cutting a Thin Gear            DEWBERRY, O. J.            HSM'87:N/D58

Repairing an Old Lathe      McLEAN, FRANK A.        HSM'87:N/D59

Using Hand Hacksaws        HOFFMAN, EDWARD G.               HSM'87:N/D68

Jigs and Fixtures                 HSM'87:S/O15

More On Way Lube                          HSM'87:S/O15

Two Workshop Hints                        HSM'87:S/O15

On Safety                            HSM'87:S/O16

Reducing Expense                             HSM'87:S/O16

"Floating" End Mill Sharpener Part 1, 2         DUCLOS, PHILIP              HSM'87:S/O20,N/D38

Power Quill Feed Attachment, A     DWORZAN, P.    HSM'87:S/O25

The Extremes of Space, Parts 1-2   DAVIDSON, BILL             HSM'87:S/O28,N/D46

Centering Guide  OPFER, JOHN, JR.            HSM'87:S/O32

Blueing Steel       LAUTARD, GUY               HSM'87:S/O41

Investment Casting, Parts 1-2          LEWIS, JAMES R.             HSM'87:S/O44,N/D53, HSM'88:J/F44,M/A42,M/J46

Lighting Your Vertical Mill             McLEAN, FRANK A.        HSM'87:S/O49

Building a Cabinet for Your Sandblaster        WASHBURN, ROBERT A.              HSM'87:S/O50

The Apprentice    WASHBURN, ROBERT A.              HSM'87:S/O50

Art of Soldering, The         HUNT, DONALD               HSM'87:S/O56

Using Wrenches and Screwdrivers  HOFFMAN, EDWARD G.               HSM'87:S/O64