HSM 1988
Antique Machine Tool Museum HSM'88:J/A12
A Shield Against Corrosion HSM'88:J/A13
Demagnetize Large Pieces HSM'88:J/A13
Spare Parts HSM'88:J/A13
A Fly Cutter Arbor That Is Different HSM'88:J/A14
A Makeshift Vise Stop HSM'88:J/A15
Oops! HSM'88:J/A15
Getting With the ProgramHOWARD, THOMAS F. HSM'88:J/A16
"Whatzit" Engine, Parts 1-2 DUCLOS, PHILIP HSM'88:J/A20,S/O18
Making Identical Patterns for Multiple Lost Wax Castings, Parts 1-3 LEWIS, JAMES R HSM'88:J/A27,S/O49,N/D52
Lever Operated Tailstock, Parts 1-2 KOUHOUPT, RUDY HSM'88:J/A34,S/O42
Diamond Tool Efficiency OGINZ, FREDERICK HSM'88:J/A37
Osborne's Four Steps to Center MELTON, L.C. HSM'88:J/A42
Using a Vertical Bandsaw, Parts 1-3 WASHBURN, ROBERT A
HSM'88:J/A44,S/O46,N/D43
A Micrometer Stop Nut McLEAN, FRANK A HSM'88:J/A46
An Assist from the Forge HANCOCK, CLIFFORD HSM'88:J/A50
Cutting Torch Contour Guide LYNCH, CARLYLE HSM'88:J/A55
Safety Tips Using Taps and Dies, Parts 1-2 HOFFMAN, EDWARD G. HSM'88:J/A64,S/O64
Grow That "Third Hand" HSM'88:J/F12
Holding The Chuck HSM'88:J/F12
Miscellaneous Tooling HSM'88:J/F12
Removing Labels HSM'88:J/F12
Stopping Vibration HSM'88:J/F12
Cat Head Chucks HSM'88:J/F13
Product Review: Fu San 8" Metal Lathe SCOTT, EDWARD H. HSM'88:J/F14
A Bit of Inspiration: Sculpting with Plastics HSM'88:J/F16
Sculpting with Plastics MERCER, NORMAN J. HSM'88:J/F16
Machine Shop Calculations: Dimensions & Tolerances, Parts 7-12 HOFFMAN, EDWARD G.
HSM'88:J/F17,M/A16,M/J16,J/A17,S/O15,N/D18
Metric-Decimal Equivalents and Tap Drill Sizes ALLES, WILLIAM J., JR HSM'88:J/F19
A Sensitive Level KELLY, HOWARD HSM'88:J/F20
Protect Your Shop from Voltage Spikes HINSHAW, LOU HSM'88:J/F28
Grinding and Lapping With Diamond HESSE, JIM HSM'88:J/F36
A Plastic Dip Pot DONDRO, CHARLIE HSM'88:J/F40
Homemade Arbors McLEAN, FRANK A HSM'88:J/F48
Fly Cutter and Angle Plate KOUHOUPT, RUDY HSM'88:J/F54
First Look HSM'88:J/F57,M/A58,M/J57,J/A58,S/O58,N/D59
Networking HSM'88:J/F63,M/A63,M/J62,J/A62,S/O60,N/D60
Safety Tips Using Hand Files and Scrapers HOFFMAN, EDWARD G. HSM'88:J/F64
From the Editor RICE, JOE HSM'88:Jan through Dec
Removing A Wire Brush HSM'88:l/A 14
Q&A ROUBAL, TED HSM'88:M/A12
Band Saw Blades HSM'88:M/A13
Lava Handsoap HSM'88:M/A13
Safety Chain HSM'88:M/A13
Cutting Wood or Steel HSM'88:M/A14
A Tool Bit Index HSM'88:M/A15
Drill Holder For Lathes HSM'88:M/A15
A Camera-Tripod Attachment MARX, ALBERTO HSM'88:M/A20
A Small Melt Furnace, ROY, BILL HSM'88:M/A22
Multi-Stand BERTRAND, JEFF HSM'88:M/A25
A Mill-Drill Stand DULLUM, LAWRENCE J. HSM'88:M/A28
The Minton Milling Machine FELLER, E.T. HSM'88:M/A32
Handy Deburring Tool JONES, BRUCE HSM'88:M/A34
Reducing Tap Breakage JOHNSON, D.E. HSM'88:M/A37
Tap Drill Sizes HSM'88:M/A39
Comments on My Shop McLEAN, FRANK A HSM'88:M/A46
A Micrometer Faceplate Attachment, Parts 1-2 KOUHOUPT, RUDY HSM'88:M/A50,M/J39
One-evening Projects RUNGE, WALTER C. HSM'88:M/A54
Safety Tips Using Layout Tools HOFFMAN, EDWARD G. HSM'88:M/A64
A Feed Lever for a 10-K BENNETT, NORMAN HSM'88:M/J?4
Getting the Radius, Again HSM'88:M/J10
...And Again HSM'88:M/J11
A Quick-index Drill Stand HSM'88:M/J12
Thread Chasing HSM'88:M/J12
Q&A DEWBERRY, O. J HSM'88:M/J13
A Bit of Inspiration: Miniature Machine Shop HSM'88:M/J14
Miniature Machine Shop PROCKNOW, SID HSM'88:M/J14
Economical Large-Hole Drilling WALKER, RICHARD B. HSM'88:M/J18
Model Piston Rings DUCLOS, PHILIP HSM'88:M/J20
A New Cutoff Tool ESTY, F. BURROWS HSM'88:M/J23
Tool Plate VITKOVITS, STEPHEN, JR HSM'88:M/J25
Two-Sphere Gage CLARKE, THEODORE M. HSM'88:M/J26
Two Accessories for the Atlas 12" Lathe ERNEST, JOHN F. HSM'88:M/J28
More Inspiration, Part 2-5 ODER, JOHN HSM'88:M/J31,J/A30,S/O35,N/D38
Compound Rest Lock MARX, ALBERTO HSM'88:M/J35
The $5.00 Taper Jig Revisited OLSON, JOHN W. HSM'88:M/J42
A New Rotary Table McLEAN, FRANK A HSM'88:M/J43
Safety Tips Common Hardware HOFFMAN, EDWARD G. HSM'88:M/J64
Q&A LAUTARD, GUY HSM'88:N/D12
Books: Art of Welding, W. A. Vause HSM'88:N/D14
Books: Inspection and Gaging, Clifford W. Kennedy, Edward G. Hoffman, Steven D.
Bond HSM'88:N/D14
Books: Making Knives and Tools, Percy W. Blandford HSM'88:N/D14
Books: Metal Turner's Handybook, The Paul N. Hasluck HSM'88:N/D14
Books: Metallurgy Fundamentals, Daniel A. Brandt HSM'88:N/D14
Books: Modular Fixturing, Edward G. Hoffman HSM'88:N/D14
Books: Sheet Metal Work, R. E. Wakeford HSM'88:N/D14
Books: Soldering and Brazing, Tubal Cain HSM'88:N/D14
Books: The Antique Tool Collector's Guide to Value, Ronald S.
Barlow HSM'88:N/D14
Books: The Construction of a Weight Driven Brass Alarm Clock, John
Wilding HSM'88:N/D14
Books: The Machinist's Second Bedside Reader Guy Lautard HSM'88:N/D14
Books: Using the Small Lathe, John Wilding HSM'88:N/D14
The Watchmaker's and Model Engineer's Lathe, Donald DeCarle
HSM'88:N/D14
Cleaning Silicone Sealer Nozzles HSM'88:N/D16
Polishing HSM'88:N/D16
Eliminating Chips HSM'88:N/D17
Holding Work HSM'88:N/D17
Model Maker's Dividing Head, Parts 1-3 DUCLOS, PHILIP HSM'88:N/D20;HSM'89:J/F30,M/A41
Converting a Lathe to Cut Metric Threads LINCOLN, W.A.HSM'88:N/D30
Small Hole SawsHEDIN, R.S. HSM'88:N/D36
Drilling Steam Passages and Tangents HASLAM, KENNETH R. HSM'88:N/D40
Shortcuts to Making an Arbor McLEAN, FRANK A HSM'88:N/D46
Tooling for a Vertical Mill, Parts 1-3 KOUHOUPT, RUDY HSM'88:N/D48;HSM'89:J/F50,M/A54
Century-Old Lathe Back at Work HOLKEBOER, CARL HSM'88:N/D56
The Third Hand HSM'88:N/D61
Product Review: TRIM Computer HOFFMAN, EDWARD G. HSM'88:S/O11
Gear Cutting With The Shaper HSM'88:S/O12
Swarf Protection HSM'88:S/O12
A Thought About Turning HSM'88:S/O13
Convex and Concave Lathe Work HSM'88:S/O13
Lathe Carriage Dial Indicator GREGG, ALLENHSM'88:S/O28
A Center-mounted Drill McHENRY, ROGER HSM'88:S/O30
Buying Used Machine Tools GRADY, ROBERT L. HSM'88:S/O32
A Special Breed BARBOUR, J. O.HSM'88:S/O40
Gear Driven Shapers REISDORF, GARY F. HSM'88:S/O48
Drilling With Accuracy McLEAN, FRANK A HSM'88:S/O54
Shop Gadget Clears the Air CROW, ART HSM'88:S/O57
|
