HSM 1989

Boring and Threading Bars                              HSM'89:J/A12

Floating Drill Press Vise                  HSM'89:J/A12

Free Rotary Burrs                             HSM'89:J/A12

Good Sources                     HSM'89:J/A12

Lathe Cabinet/Stand, A      WALKER, RALPH T.        HSM'89:J/A18

Renewing Half Nuts                          HSM'89:J/A25

Generic Crane, AWENCE, DENNIS K.        HSM'89:J/A40

Tap Wrenches from Scrap                HSM'89:J/A44

Restoring a Transit             DOW, G. S.          HSM'89:J/A49

Introduction to Jigs and Fixtures     HOFFMAN, EDWARD G.               HSM'89:J/A52

Carbide End Mill, A           McLEAN, FRANK A.        HSM'89:J/A54

Product Review: Westhoff Mighty Mag                       HSM'89:J/A64

Band Saw Conversion                       HSM'89:J/F12

Ceramic Cutting Tools                     HSM'89:J/F12

Degreaser                            HSM'89:J/F12

Die Filer                              HSM'89:J/F12

Holding the Drill Chuck Arbor                       HSM'89:J/F12

Tool Bit Shims                   HSM'89:J/F12

Product Review: Royal Clamping System                    HSM'89:J/F14

Dimensions & Tolerances, Parts 13 - 16                     HSM'89:J/F16,M/A18,M/J7,J/A14

Slide Duplicating & Macro Photographic Apparatus, A             PARK, RICHARD M.        HSM'89:J/F20

Home Shop Metal Melter, Part 1-5               PILZNIENSKI, JOHN F.   HSM'89:J/F24,M/A46,M/J27,J/A36,S/O27

$100 Digital Readout        HANLEY, DICK  HSM'89:J/F39

More Inspiration, Part 6    ODER, JOHN      HSM'89:J/F42

Mirror-faced Hammer, The                             HSM'89:J/F44

Carriage Multi-stop           DUBOSKY, ED   HSM'89:J/F46

Single Point Cutting           CLARKE, THEODORE M.              HSM'89:J/F53

Drilling Center Holes Accurately   McLEAN, FRANK A.        HSM'89:J/F56

Safety Tips: Common Hardware, Part 2-4                    HSM'89:J/F64,M/A64,M/J64

Three Modifications                         HSM'89:M/A12

Taper Cutting Checks and Setup                     HSM'89:M/A13

Telescoping Taper Attachment                       HSM'89:M/A15

Product Review: Mitee-Bite Clamping System                          HSM'89:M/A16

SentinelDEHNICKE, DUANE        HSM'89:M/A20

From Steam Arm to Elgamill           MASON,HAROLD            HSM'89:M/A22

Building the Panther Pup, Parts 1-9               REICHART, JOHN W. "BILL"               HSM'89:M/A30,M/J32,J/A8,S/O34,N/D34;HSM'90:J/F38,M/A28,M/J31,J/A42

Two Steps to Center           HOLTHAM, JON H.          HSM'89:M/A38

Machine Cutting Speeds    STOKES, FRANK              HSM'89:M/A50

Grinding Bench, A              McLEAN, FRANK A.        HSM'89:M/A51

The Gear Head Engine Lathe, Part 1-3                          HSM'89:M/A52,M/J52,J/A47

Product Review: Loc-Line Modular Hose System                     HSM'89:M/J14

Key Seat Attachment                        HSM'89:M/J16

Machining Small Diameter Work                   HSM'89:M/J16

Power Saw Blades                             HSM'89:M/J16

Gear Repair          REISDORF, GARY F.        HSM'89:M/J38

Repeatable Quick-Change Tool Holder         SCHROEDER, ARDEN     HSM'89:M/J40

Color of Steel, The            MASSEY, G. ROBERT      HSM'89:M/J43

Self-Contained Cutter Grinder, A                   HSM'89:M/J44

A Lathe Milling Adaptation, Part 1, 2, 3        KOUHOUPT, RUDY         HSM'89:M/J47,J/A56,S/O52

Depth Gage Attachment, A                              HSM'89:M/J50

Depth Gage Attachment, A               McLEAN, FRANK A.        HSM'89:M/J50

Using Carbide Turning Tools           ESTY, F. B.          HSM'89:M/J57

Arbor Press                         HSM'89:N/D14

Restoring Battered Threads                             HSM'89:N/D14

Getting a Smooth Finish                   HSM'89:N/D15

More Belt Power                              HSM'89:N/D15

Product Review: Huron Workholding System                            HSM'89:N/D16

Making the Lathe Safer      JEDLICKA, JIM  HSM'89:N/D20

Accurate Quill Depth Control for Mill/Drills              BODMER, JOHN A.          HSM'89:N/D24

Bench Block        ACKER, STEVE  HSM'89:N/D29

Internal Keyways                HSM'89:N/D40

Lathe Cutting Internal Keyways       WALKER, RICHARD B.   HSM'89:N/D40

Computers in the Shop, Basic Principles      FRIESTAD, ROLAND       HSM'89:N/D43

Tool Post Boring Bars, Part 1                         HSM'89:N/D48

Tooling for the Micro Machinist     SPROTT, JAMES               HSM'89:N/D54

Otis Makes an Accurate Final Cut   MELTON, L. C    HSM'89:N/D57

Reproducing a Taper                         HSM'89:S/O14

Setting Tool Height                           HSM'89:S/O15

Centering the Tailstock                    HSM'89:S/O16

More Accuracy for your Three-jaw                HSM'89:S/O16

Movement Indicator                          HSM'89:S/O16

Product Review: The Manupress,    LAUTARD,GUYHSM'89:S/O17

Product Review: Accu-Finish 11 Precision Tool Sharpener                    HSM'89:S/O20

Right Triangles, Part 1       HOFFMAN, EDWARD GHSM'89:S/O22,N/D18

Brass Kaleidoscope, A                     HSM'89:S/O24

Auxiliary Outboard Motor BracketGREEN, WILLIAM F.       HSM'89:S/O41

Degassing Molten Aluminum                         HSM'89:S/O44

Boring Bar and Tool Holder for Compact 5  RASNICK, JACK W.         HSM'89:S/O46

Basics of Locating, Part 1, 2                           HSM'89:S/O50,N/D52

Computers in the Shop, Introduction             FRIESTAD, ROLAND       HSM'89:S/O56