HSM 1992
Number Wheels KINNAMAN, CARL C.
HSM'92:J/A12
Vise Sine Bar, A GEIB, RANDALL
R. HSM'92:J/A13
Product Review: CAD for the Small Shop HOFFMAN,
EDWARD GHSM'92:J/A14
Product Review: Cameron Series 164 Micro Drill
Press GASCOYNE,
JOHN HSM'92:J/A15
Measuring With Pins Parts 1-3
HOFFMAN, EDWARD GHSM'92:J/A18,S/O16,N/D16, HSM'93:J/F16
Deluxe Radius Turning Attachment, A Parts
1-2 WILSON, GLENN
L. HSM'92:J/A2,0,S/O18
Starting Turning Part 3 Lace
Bobbins
MASON,
AUDREY
HSM'92:J/A27
Wood Carving Machine,
A
SNYDER, JOHN W.
HSM'92:J/A34
Drill Press Vise
Restraints
BERGER, JAMES
HSM'92:J/A45
Simple Grinder Water Pot,
A FELLER,
ERNEST T. HSM'92:J/A50
Making a Catch Plate
KOUHOUPT, RUDY HSM'92:J/A51
Bell Chuck for Your Lathe,
A MCLEAN, FRANK
A. HSM'92:J/A54
Another Fly
Cutter
FELLER, ERNEST T.
HSM'92:J/A57
Fixture Keys HOFFMAN, EDWARD
GHSM'92:J/A58
Three-phase Motors from Single-phase
Supplies COX, V.
J.
HSM'92:J/F12
Book Review: Clockmaking & Modelmaking Tools and
Techniques LAUTARD,
GUY
HSM'92:J/F14
Geometric Construction Parts 3-5 HOFFMAN, EDWARD
GHSM'92:J/F15,M/A17,M/J15
Turning Short Tapers on a Mill
THOMAS, STEPHEN HSM'92:J/F18
Indexing Template for Easier Layout
HOFFMAN, EDWARD GHSM'92:J/F29
Simple Indexing Rotary Table, A HOFF, MICHAEL
F., JR. HSM'92:J/F32
Steve Makes a Mistake ACKER, STEVE
HSM'92:J/F38
Adapter for a Boring
Head
VREELAND, DON H. HSM'92:J/F39
Drill Press Quill Lock YOUNG,
MARSHALL R.HSM'92:J/F40
Holder for 13/16" Dies, AKOUHOUPT,
RUDY HSM'92:J/F42
Fitting Small Drill
Chucks
McLEAN, FRANK A. HSM'92:J/F52
Commercial ComponentsHOFFMAN, EDWARD GHSM'92:J/F56
Tapping OversizeJOHNS, JACK HSM'92:J/P 13
Product Review: Vee-Grooved Snap
Jaws
HSM'92:M/A11
Vee-Grooved Snap
Jaws
HSM'92:M/A11
Product Review: Band Saw SplicerRICE,
JOE
HSM'92:M/A12
Multi-purpose Gadget, A ALLERS, CHARLES H.
HSM'92:M/A14
Shrink the Bore JOHNS, JACK
HSM'92:M/A14
Aluminum Raw Stock
Source BROWN, KENNETH
G HSM'92:M/A15
Cleaning Up Magnetic
Chucks SEVIGNY,
DICKHSM'92:M/A15
Starting Turning Part 1 A
Paperweight MASON,
AUDREY
HSM'92:M/A20
A Bit of Inspiration: David Kucer,
Miniaturist
RICE, JOE
HSM'92:M/A36
Knurls and
Knurling
CARVER, ERIC HSM'92:M/A38
Turning a Morse Taper KOUHOUPT,
RUDY HSM'92:M/A42
Improving the Collet Draw Tube MCLEAN,
FRANK A. HSM'92:M/A49
Mechanical Fasteners Parts 1, 2 HOFFMAN,
EDWARD GHSM'92:M/A50,M/J53
Inexpensive Power Feed,
An KALB,
MELVIN L.
HSM'92:M/A53
Extending Blade Life
KNITTLE, MARK Q.
HSM'92:M/J13
Setting Up in the
Four-jaw
BUQUOI, MICHEL
HSM'92:M/J13
Small Item Organizer
BECK,
B.
HSM'92:M/J13
Keep It Simple,
Guys
HSM'92:M/J14
Starting Turning Part 2 Decorative Boxes MASON,
AUDREY
HSM'92:M/J19
Adapting the Myford for Hand Turning and 10mm
Collets SMITH, W.
R. HSM'92:M/J26
Removing Broken Screws and
Studs
HOFFMAN, EDWARD GHSM'92:M/J37
Machine Tool Covers MYERS,
TED HSM'92:M/J39
Homemade Electric Motor Mount,
A WALKER,
RALPH T. HSM'92:M/J42
Ball Turning in the Mill BENNETT, NORMAN
H HSM'92:M/J44
Setting Up Shop KOUHOUPT,
RUDY HSM'92:M/J47
Unusual Lathe Dog, An MCLEAN, FRANK
A. HSM'92:M/J50
Chip
Vac
KOLAR,
GEORGE
HSM'92:N/D14
File Them Away GREGRICH, ARNOLD
HSM'92:N/D14
Chuck Key
Storage
JOHNS, JACK HSM'92:N/D15
Second Life For Boot Liners
WHITE, GREG HSM'92:N/D15
A Thread Tooling System and Wiggler for the Lathe JOHNSON, D.
E.HSM'92:N/D18
Starting Turning Part 4 Two Candlesticks
MASON,
AUDREY
HSM'92:N/D24
Cutting Irregularly Shaped Holes ROSCOE,
LOWIE
HSM'92:N/D39
Basement Rust AMBROSINO, MICHAEL
M. HSM'92:N/D40
Cylinder or Master Square,
A MCLEAN, FRANK
A. HSM'92:N/D42
Tiny Engines KOUHOUPT,
RUDY HSM'92:N/D46
Product Review: Math Solutions At Your Fingertips
HSM'92:N/D56
Product Review: Math Solutions At Your Fingertips HOFFMAN, EDWARD
GHSM'92:N/D56
Thread-cutting Aid, A
BROWN, KARL
R.
HSM'92:N/D57
Product Review: Vernier
Protractor
HSM'92:S/O12
Vernier
Protractor
HSM'92:S/O12
Emery Cloth Substitute BENDER,
BRIAN
HSM'92:S/O14
Odds and Ends EVANS, R.
W. HSM'92:S/O14
Tapered Arbor JOHNS,
JACK HSM'92:S/O14
Knurling Tip LUCHESSA, C.
M.
HSM'92:S/O15
Improved Lathe Drive, AnWADHAM, G. HSM'92:S/O24
Checkering in the Mill ACKER,
STEVE HSM'92:S/O30
On Improving the Image MARX,
ALBERTO
HSM'92:S/O33
Alternate Clamping Devices Parts
1-2 HOFFMAN,
EDWARD
G.
HSM'92:S/O40,N/D34
Making a Knurled Head
Thumbscrew
MCLEAN, FRANK A. HSM'92:S/O45
Skipping
SEXTON,
TERRY
HSM'92:S/O46
Taper Turning VREELAND, DON
H. HSM'92:S/O47
Checking Lathe
Alignment
KOUHOUPT, RUDY HSM'92:S/O48
Build Your Own CNC Controller Parts 1-3 FRIESTAD, R.
W.
HSM'92:S/O52,N/D51;HSM'93:J/F54
Vise Jaw Fixtures Parts
1-3
HOFFMAN, EDWARD GHSM'92:S/O56,N/D54, HSM'93:J/F52
|
