HSM 1994

In Lieu of a Thread Cutting Dial      SNOW, HARRY U.            HSM'94:J/A16

Pin ViseZANROSSO, EDDIE M.    HSM'94:J/A16

Some Pointers on Scroll Sawing     LAUTARD, GUY               HSM'94:J/A34

Mill Spindle Indicator Holder, A     RICE, ROY          HSM'94:J/A35

Large Radius Cylindrical Cuts on a Shaper    HOIJER, PETER J              HSM'94:J/A44

Correcting a Milling Machine ViseMcLEAN, FRANK A.        HSM'94:J/A50

Some Parts Sources           HONEYWELL, DONALD G.          HSM'94:J/A56

Video Review: The 1893 Springfield Duryea            RICE, JOE            HSM'94:J/A56

From the Editor   RICE, JOE            HSM'94:J/F,M/J-N/D2

Another Vise Jaw Idea       BRUCE, FRED    HSM'94:J/F16

Oil Dispenser      FREEMAN, HARVEY       HSM'94:J/F16

Stable Propane Torch, A    WELLS NORM   HSM'94:J/F17

Tool Tray              KOLAR, GEORGE            HSM'94:J/F17

Product Review: Learn CAD Now and Easy CAD 2    RICE, JOE            HSM'94:J/F18

Product Review: Micrografx Designer 3.1   RICE, JOE            HSM'94:J/F19

Product Review: The Paragon Q-11A Heat-treating Furnace    ACKER, STEVE  HSM'94:J/F20

Book Review: Machinist's Third Bedside Reader, The            McKINLEY, CLOVER      HSM'94:J/F23

Balancing a Grinding Wheel            CHRISTOPHERSON, A. M.            HSM'94:J/F36

Unimat Headstock Adapter              HUARD, CONRAD A        HSM'94:J/F38

Facing to Accurate Length               MELTON, L. C.   HSM'94:J/F40

More on Three-phase Converters    MATTHYS, ROBERT J.    HSM'94:J/F41

Base for a Band Saw           KOUHOUPT, RUDY         HSM'94:J/F46

Milling Machine                 HSM'94:J/F49

Using a Router on the Vertical Milling Machine         McLEAN, FRANK A.        HSM'94:J/F49

Retrofitting Atlas/Craftsman and Other Lathes to CNC Control Parts 4, 5           FRIESTAD, R. W.              HSM'94:J/F52,M/J48

Dental Burrs in the Metal Shop       BROWNE, DONOVAN V.               HSM'94:M/A16

Surface Plate Care             WELLS NORM   HSM'94:M/A16

Cut Threads With a Tap      HESTER, DON    HSM'94:M/A17

Product Review: Adjustable Packing Blocks               KOUHOUPT, RUDY         HSM'94:M/A18

Product Review: Workshop Tool 8, Accessory PlansRICE, JOE            HSM'94:M/A18

Product Review: Workshop Tools & Accessory Plans                             HSM'94:M/A18

Guest Editorial    SWINNEY, ROBERT D.   HSM'94:M/A2

Build and Use a Tool Post Grinder Parts 1-3               KOUHOUPT, RUDY         HSM'94:M/A20,M/J52,J/A46

North American Model Engineering Exposition         RICE, JOE            HSM'94:M/A30

Building the Titan .60 Parts 1-5       GENEVRO, GEORGE       HSM'94:M/A34,M/J32,J/A39,S/O44,N/D32

Turning Short Tapers on a Mill/drill               THOMAS, STEPHEN M.  HSM'94:M/A41

A Quick Tumbler Gear Reversal Mechanism               MYERS, TED      HSM'94:M/A44

Unusual Turning Operation, An        McLEAN, FRANK A.        HSM'94:M/A46

Set Blocks            HOFFMAN, EDWARD G.               HSM'94:M/A48

Simple Timer, A  REICHART, BILL              HSM'94:M/A52

Modified Arbor Press Ram, A         ANDREWS, ALAN            HSM'94:M/A54

Reuse Broken Drills          VAN VEGHEL, L. A.         HSM'94:M/A55

Video Review: A Video Visit with Guy Lautard & Bill Fenton              McKINLEY, CLOVER      HSM'94:M/J13

Bridgeport Mill Tricks      KOUTSOURES, JIM         HSM'94:M/J14

Internal Keyway Slotting   KOLAR, GEORGE            HSM'94:M/J15

Product Review: AMT Radial Drill Press      HOFFMAN, EDWARD G.               HSM'94:M/J16

Single-shot, Lever-action, Falling-block Rifle Action Parts 1-4             MUELLER, WALTER B.  HSM'94:M/J20,J/A26,S/O36,N/D45

Mill/drill Support, A          HOLM, PAUL     HSM'94:M/J29

More on EDM     LEWIS, JACK     HSM'94:M/J44

Workholder Design Tips Part 1       HOFFMAN, EDWARD G.               HSM'94:M/J56,J/A51,S/O54

Milling a Keyseat in a Shaft             McLEAN, FRANK A.        HSM'94:M/J58

Reviving a Lunch Break Shaper        SEXTON, TERRY              HSM'94:N/D22

Chatterless Countersinks  HEDIN, R. S.       HSM'94:N/D48

Low-cost Reversing Switch for Electric Motors         HALBERT, R. L  HSM'94:N/D53

Clamping Tapered Material in a Vise—No Problem!  HARMON, JOE   HSM'94:N/D54

Product Review: Starrett's No. 164 Series "A" Clamp               LAUTARD, GUY               HSM'94:N/D55

Improving the Horizontal/Vertical Band Saw               McLEAN, FRANK A.        HSM'94:N/D58

Specialty Locating Devices Part 1  HOFFMAN, EDWARD G.               HSM'94:N/D60

Make an Open-sided Tool Post        KOUHOUPT, RUDY         HSM'94:N/D62

Book Review: Master Mechanics' Manual, Volume One         McKINLEY, CLOVER      HSM'94:S/O18

Video Review: Fourth Annual NAMES Exposition    McKINLEY, CLOVER      HSM'94:S/O18

Avoiding Broken Gear Belts            LANGFORD, FRANCIS    HSM'94:S/O19

Serious Milling With the Lathe Parts 1-3     JOHNSON, D. E.HSM'94:S/O20,N/D38, HSM'95:J/F 30

Excerpts from The Federal Firearms Regulations Guide       DOCKERY, KEVIN           HSM'94:S/O42

Tap Dogs              PETTIT, GLENN A.           HSM'94:S/O43

Files and Filing Parts 1-3  HOFFMAN, EDWARD G.               HSM'94:S/O47,N/D50, HSM'95:J/F48

Fixture for Milling End Curves, A   KOUHOUPT, RUDY         HSM'94:S/O50

Keyway Broach Bushings  McLEAN, FRANK A.        HSM'94:S/O56