HSM 1996

Long Story Shortened (extra-long taps)         WHIPPLE, STEVEN G.     HSM'96:J/A 20

Three-phase Idler Flywheel              HOUSEMAN, ROBIN       HSM'96:J/A 20

Lathe Handles      RAUBACH, PIERCE         HSM'96:J/A 21

Book Review, Designing Cost-Efficient Mechanisms               JOLY, DAVID     HSM'96:J/A 23

Mill-drill Adventures Part 7 Keeping Track of the Cutting Tool and Table Positions         JOHNSON, D. E.HSM'96:J/A 30

Quick-release T-rest for the Sherline Lathe, A            SMITH, W. R       HSM'96:J/A 36

Internal Spindle Stop          BLACKMON, BILLY J.    HSM'96:J/A 46

Indicator Stand, An             BOWER, EARL L.             HSM'96:J/A 48

Stuck Chucks, One-more-time, Didactic #17              KRATT, HENRY J.            HSM'96:J/A 49

Sharpening Tungsten Carbide Drills               NETZEL, WALTHSM'96:J/A 50

Gunsmith's Workbench, A German Silver Escutcheons             MORROW, LAURIE         HSM'96:J/A 52

Proper Use of Diamond Dressers, The          BOCHERT, JOHN             HSM'96:J/A 56

Carbide Inserts    WITHEROW, JEFF            HSM'96:J/A 58

Working in the Dark          DOLLNIG, WERNER W.HSM'96:J/A 67

Takang Model 1760G Lathe; Product Review              BENJAMIN, JOHN            HSM'96:J/A22

A Bit of Inspiration: The Work of John Crunkleton    CRUNKLETON, JOHN     HSM'96:J/A24

Table Stop            MADISON, JAMES           HSM'96:J/A44

Taig Lathe Tool Rest, A     McLEAN, FRANK A.        HSM'96:J/A54

From the Editor   RICE, JOE            HSM'96:J/F 2, M/A 4, J/A 4,S/O 4, N/D 4

Mill/drill Tips      EISLER, DAVID  HSM'96:J/F 21

Emco Maier Dl-4" Cam Lock Fixture Plate; Product Review   LINDQUIST, DAVID         HSM'96:J/F 22

FlexArm System; Product Review   HOFFMAN, EDWARD G.               HSM'96:J/F 23

Mill-drill Adventures Parts 5-6 A Power Feed for the Main Table and a Rotary Table       JOHNSON, D. E.HSM'96:J/F 26, M/A 32

Engineering Plastics          DOWLING, THOMAS W. III           HSM'96:J/F 33

Maverick Engine Parts 3-4               DUCLOS, PHILIP              HSM'96:J/F 44,M/A 42

Lathe Tips            HOFFMAN, EDWARD G, STONE, EDWARD P..      HSM'96:J/F 50

Little Job Cement Mixer Parts 1-4KOUHOUPT, RUDY         HSM'96:J/F 54, M/A 50, M/J 55, J/A 51

Cleaning a Universal Chuck             McLEAN, FRANK A.        HSM'96:J/F 57

Locating Pins Parts 2-3     HOFFMAN, EDWARD G.               HSM'96:J/F 62 M/A 54

Electrical Discharge Machining Part 5 Head and EDM Operation, The  LANGLOIS, ROBERT P.  HSM'96:J/F34

Advantage of Three-phaseFRENCH, DICK  HSM'96:M/A 19

Hacksaw Cuts Simplified  WILDER, FRED E.            HSM'96:M/A 19

No More ShocksBLOCKER, DAVID C.      HSM'96:M/A 19

Ornamental Turning Lathe; Product Review  LAUTARD, GUY               HSM'96:M/A 20

Adapting the Sherline for Wheel Cutting and Pinion Making, Parts 1-2SMITH, W. R.      HSM'96:M/A 24 M/J 36

Substitute Tailstock Center              LaMANCE, THOMAS       HSM'96:M/A19

Electrical Discharge Machining Part 6 Other Odds and Ends   LANGLOIS, ROBERT P.  HSM'96:M/A37

Small Shop Butt Welder, A              HABICHER, WOLFGANG F.          HSM'96:M/A48

How to Set Up and Use a Drill Grinding Attachment  McLEAN, FRANK A.        HSM'96:M/A57

"Truing Your Action and Installing a New Barrel";Video Reviews           LAUTARD, GUY               HSM'96:M/J 20

Video Review: American's View of the English Wheel, An      LAUTARD, GUY               HSM'96:M/J 20

Video Review: Bedding, Scoping, and Crowning the Remington 700  LAUTARD, GUY               HSM'96:M/J 20

Video Review:Correcting Bolt Lug Engagement and Excess Headspace          LAUTARD, GUY               HSM'96:M/J 20

Video Review: Edge those Panels  LAUTARD, GUY               HSM'96:M/J 20

How and Why of Tangential Cutting, The      BURKE, DESMOND         HSM'96:M/J 28

Guest Editorial    BOOTH, KATHY               HSM'96:M/J 4

Building Phil Duclos' Model Maker's Dividing Head  COLLINS, MARSH           HSM'96:M/J 46

Remote Switch for the Mill             VOSS, C. O.         HSM'96:M/J 49

Fixturing With Collets Parts 1-3     HOFFMAN, EDWARD G.               HSM'96:M/J 60 J/A60 N/D 62

Using the Diamond Toolholder       KOUHOUPT, RUDY         HSM'96:M/J24

Sliding Bevel Gage with Protractor, A           WRIGHT, TED    HSM'96:M/J31

Variable Speed DC Motor for the Home Shop            EYER, CHARLES              HSM'96:M/J50

Trepanning Tool, A             McLEAN, FRANK A.        HSM'96:M/J58

Holding Small Threading Dies         BROWN, CHARLES         HSM'96:N/D 20

Get a Handle On Your Lathe            GASCOYNE, JOHN B.      HSM'96:N/D 46

Atlas Tailstock Modification           JONES, BRUCE  HSM'96:N/D 55

Cylinders and Pistons for Two-stroke Cycle Model Engines    GENEVRO, GEORGE       HSM'96:N/D38

Variations on a "Whatzit" engine      HOLLENBECK, KEN       HSM'96:N/D48

Rebirth of a Model C South Bend Lathe, The               GRAHAM, DOUGLAS      HSM'96:N/D49

Pseudo Drawbar for the Tailstock, A             NYMAN, PHIL    HSM'96:N/D52

Spur Center for Turning Wood, A   McLEAN, FRANK A.        HSM'96:N/D59

Machine Mobility              VORDAHL, NORMAN A.               HSM'96:S/O 20

Made in the Shade (lathe way cover)              STANAITIS, PETE             HSM'96:S/O 21

Milling a Flat       BLOCKER, DAVID C.      HSM'96:S/O 21

Magnetic Base Indicator Mount      DAVIS, M. O.      HSM'96:S/O 22

Almost a Product Review  NOLAN, PETE    HSM'96:S/O 23

Hot Bluing Steel  ACKER, STEVE  HSM'96:S/O 28

Cutting Steel with a Circular Saw Blade        ACKER, STEVE  HSM'96:S/O 33

Setting Up Work in the Lathe          WILLOX, PETER J.           HSM'96:S/O 33

From the Editor   McKINLEY, CLOVER      HSM'96:S/O 4

How to Make a Chuck Backplate     McLEAN, FRANK A.        HSM'96:S/O 52

Make Your Own Lathe Collets, Parts 1-2      KOUHOUPT, RUDY         HSM'96:S/O 58, N/D 56

Machining on the InternetMENDUM, J. H.HSM'96:S/O 62

Change Gears       ISAAC, P.             HSM'96:S/O 63

Tighten the Spindle Pulley               RACHUNAS, ART             HSM'96:S/O22

An Elevated or Auxiliary Lathe Spindle Part 1-2         McLEAN, FRANK A.        HSM'96:S/O34 N/D32

Walking Staff, The             TITUS, DON        HSM'96:S/O43

Steam/Air Engine for Fun, A            KEREKGYARTO, GEORGE           HSM'96:S/O48

Time for Reflection, A      McLEAN, FRANK A.        HSM'96:S/O56