HSM 1997

Screw Heads and Screwdrivers        SCHULZINGER, JACOB  HSM'97: J/A 52

Filling a Boring Bar           HUGHES, ED      HSM'97:J F J/F

From the Editor   McKINLEY, CLOVER      HSM'97:J/A 2

Fast Dressing of Band Saw Welds, A             DOOLIN, THOMAS J.       HSM'97:J/A 25

Sharpen for Brass CuttingBLACKBURN, CHARLIE               HSM'97:J/A 25

Product Review: 950 Bead Blaster from Skat Blast    ACKER STEVE   HSM'97:J/A 26

Product Review: Darex Corporation's Drill Doctor    JOLY DAVID      HSM'97:J/A 28

Mill-drill Adventures: New Handwheels and Leadscrew Bearings Fix Backlash and Rattles Part 8, 9            JOHNSON, D. E.HSM'97:J/A 32, S/O 40

Adjustable Lathe Stop for Under $15            TITUS, DON        HSM'97:J/A 37

Basic Industrial Electrical Control  COHON, HAROLD G.      HSM'97:J/A 40

Grinding Tool Bits for a Smooth Cut             BURNS, FRANK E.           HSM'97:J/A 58

Tapping a Channel-shaped Part        BAYLISS, LEROY C         HSM'97:J/F 22

Band Saw Improvement     TALBOT, BRYAN E.         HSM'97:J/F 23

Threading On a Lathe         STELLHORN, ROBERT   HSM'97:J/F 23

5C Collet Adapter for the Lathe, AJOHNSON, D. E.HSM'97:J/F 26

Low-cost Bead Blaster, AACKER STEVE   HSM'97:J/F 36

A Stirling-powered Tractor, Parts 1-7       KOUHOUPT, RUDY         HSM'97:J/F 44, M/A 28, M/J 44, J/A 54, S/O 47 N/D 46, HSM'96:N/D24

Tool Rests for Turning Wood          McLEAN, FRANK A.        HSM'97:J/F 48

Mounting Small Chucks and Faceplates         KOUHOUPT, RUDY         HSM'97:J/F 53

You Can Find It    BATORY, DANA MARTIN              HSM'97:J/F 56

Wheel You Can't Live Without, The              MUELLER, WALTER B.  HSM'97:J/F 58

Supplement to the Home Shop Motor Controller       EYER, CHARLES              HSM'97:J/F 60

How I Almost Became a Millionaire             LIVINGSTON, JESSE        HSM'97:J/F 62

Jigs & Fixtures: Fixturing With Collets, Parts 4-8      HOFFMAN, EDWARD CHSM'97:J/F 63, M/A 58, M/J 62, J/A 63, S/O 62

Three-jaw Chuck Can Be Accurate, A            DOOLIN, THOMAS J.       HSM'97:J/F F 22

From the Editor   RICE, JOE            HSM'97:J/F-M/A 4, M/J 2, S/O-N/D 4

Piloted Tap Guide Wrench, A          LINCOLN, W. A. 'LINK"  HSM'97:M/A 34

You Can Do It      SCHONHER, SPENCER   HSM'97:M/A 40

The Universal Plain Dividing Head, Parts 1-4              KUZMACK, RICH             HSM'97:M/A 41, M/J 37, J/A 48, S/O 50

Faceplate Toolholder, A    THOMSON, D. M.             HSM'97:M/A 45

Reconditioning an Atlas Milling Machine, Parts 1-3  KOUHOUPT, RUDY         HSM'97:M/A 46, M/J 58, J/A 60

Product Review: Smithy CB 1 220 XL          HANEY LON       HSM'97:M/A 49

Bit of Inspiration, A Machining Skills Pay Off            GANOE, WILLIAM H.      HSM'97:M/A 52

Woodworking in the Machine Shop               ERNEST, JOHN F.             HSM'97:M/A 54

How to Make a Tapered End Mill    McLEAN, FRANK A.        HSM'97:M/A 56

Video Review: "Wheel Cutting, Pinion Making Depthing"        LAUTARD, GUY               HSM'97:M/J 22

Book Review: How to Make a Skeleton Wall Clock   LAUTARD, GUY               HSM'97:M/J 24

Simplest Phase ConverterGRIMES, THOMAS           HSM'97:M/J 25

Spindle Power for the Unimat         GALLAGHER, MARK      HSM'97:M/J 25

Victorian" Engine, A, Part 1-4         DUCLOS, PHILIP              HSM'97:M/J 28, J/A 42, S/O 31, N/D 40

Few Thoughts on Shapers, A            McLEAN, FRANK A.        HSM'97:M/J 51

Mill-drill Spindle Lock     LEGNAME, RUDY            HSM'97:MA 39

Product Review: Grizzly G4000 Lathe          PERKINS, DON  HSM'97:N/D 17

Video Review: "Graver Making & Hand Turning for Clockmakers & Modelmakers"         LAUTARD, GUY               HSM'97:N/D 22

Scrape & Shape Parts 1-5  THOMAS, STEPHEN M.  HSM'97:N/D 26, HSM'98:J/F 35, M/A 41, M/J 35, J/A38

Balanced Ball Handles       SEXTON, TERRY              HSM'97:N/D 50

Useful, High-quality Magnifying Glass, A     LAUTARD, GUY               HSM'97:N/D 55

Turning Your Vise Into a Universal Workholding System, Parts 1-7      HOFFMAN, EDWARD CHSM'97:N/D 60, HSM'98:J/F 64, M/A 62, M/J 60, J/A 63, S/O 62, N/D 62

Making an Angle Plate       KOUHOUPT, RUDY         HSM'97:N/D 63

Machine Shop Crossword Puzzle    INSTONE, JAMES R.        HSM'97:ND 20

Lathe Alignment  FANGOHR, JOEHSM'97:ND 58

Machinist Uses for Seemingly Unrelated Products    DOOLIN, THOMAS J.       HSM'97:S/O 22

Water-cooling Torches     JULIAN, BILL     HSM'97:S/O 22

Fine Feed Attachment for a Vertical Mill, A Parts 1, 2              WADHAM, G.     HSM'97:S/O 24, N/D 32

Band Saw FixtureDRAYSON, D. A.               HSM'97:S/O 46

Rigid Tool Bit Clamp, A    GENEVRO, GEORGE       HSM'97:S/O 54

Book Review: My Own Right TimeJOLY DAVID      HSM'97:S/O 55

Micro Machinist, The: Making Accurate Squares        KOUHOUPT, RUDY         HSM'97:S/O 56

Another Mill-drill Adventure           HOKE, GEORGE F.           HSM'97:S/O 58

Test-tube Stirling Engine, A             O'NEIL, DAVE    HSM'97:S/O 61