HSM 1998

Book Review: Offenhauser             RICE, JOE            HSM'98:J/A 23

Few Good Hints, A             HAINES, C. LAWRENCEHSM'98:J/A 24

Floating Drive, ALEMANCE, THOMAS      HSM'98:J/A 24

Found Materials  SWITZER, GENE               HSM'98:J/A 24

Sharpening Lathe Tools     LOER, CHARLES H.         HSM'98:J/A 24

Product Review: Shooting Star Technology CBX Digital Readout          GRAFF, JOHN    HSM'98:J/A 26

Build Your Own Shaper Parts 1, 2   COLLINS, MARSH           HSM'98:J/A 30, S/O 40

From the Editor   McKINLEY, CLOVER      HSM'98:J/A 4

Pulley Arrangement vs. Spindle Speed           REYNOLDS, JIM               HSM'98:J/A 44

Wooden Work Support in the Mill, A            ACKER, STEVE  HSM'98:J/A 58

Computer-aided Dividing Plates      FOSTER, CHARLES R      HSM'98:J/F 24

Ultra Precision Parallel Set             HAUSER, JAMES W.        HSM'98:J/F 24

Machine Shop Crossword Puzzle    INSTONE, JAMES R.        HSM'98:J/F 25, M/J 59, J/A 25, S/O 24

Building The Edge Master Lawn Edging Machine Parts 1-        JOHNSON, D. F.HSM'98:J/F 28, M/A 30, M/J 54, J/A 53, S/O 46

From the Editor   RICE, JOE            HSM'98:J/F 4, M/A 4 M/J 4, S/O 6, N/D 4

Telegraph Key Parts 1, 2   RIPKA, DOUG    HSM'98:J/F 42, M/A 36

Drawbar Knocker               WELLS, NORMAN           HSM'98:J/F 47

"Victorian" Engine, A, Part 5           DUCLOS, PHILIP              HSM'98:J/F 48

Old Compound Indexing Table Reworked, The            KUZMACK, RICH             HSM'98:J/F 54

PRIME  RICE, JOE            HSM'98:J/F 56

Making a Clapper               KOUHOUPT, RUDY         HSM'98:J/F 60

Indexing Parts in a Set       DARNER, RONALD G.    HSM'98:J/F 63

Headstock Angle Adjuster for the Sherline 4000 Lathe            DENNING, JOHN H.         HSM'98:J/F 66

All-around Access              GASCOYNE, JOHN          HSM'98:M/A 22

Hacksaw Cuts      GRASS, JOHN    HSM'98:M/A 22

Product Review: John Deere Model E           RICE, JOE            HSM'98:M/A 24

Product Review: Math Solutions for Your ComputerHOFFMAN, EDWARD G.               HSM'98:M/A 25

Build & Use an Adjustable Angle Plate Parts 1-3        KOUHOUPT, RUDY         HSM'98:M/A 48, M/J 42, J/A 60

Copper and Its Alloys        GENEVRO, GEORGE       HSM'98:M/A 51

Modify Your Bead Blast Gun           HOLM, PAUL, J.               HSM'98:M/A 60

Parting Off           GRASS, JOHN    HSM'98:M/J 22

Using the Needle Point Shaft in a Wiggler Set            BAYLISS, LEROY C.        HSM'98:M/J 22

Filing Rest For The Sherline Lathe, A            SMITH, W. R.      HSM'98:M/J 26

Additions to the Quorn tool and Cutter Grinder Parts 1, 2        MUELLER, WALTER B.  HSM'98:M/J 46, J/A 46

Mill-drill Modification, ASCHAEFFER, WILLIAM K.            HSM'98:M/J 62

Grease Adapter for the South Bend, A           THOMPSON, JACK          HSM'98:M/J 63

Product Review: Richlite Fibre Laminate     HOFFMAN, EDWARD GHSM'98:N/D 26

Peace and Quiet   SULKIN, BARRY              HSM'98:N/D 27

Indexing and Dividing        JOHNSON, D. F.HSM'98:N/D 28

Gear Cutting on the Sherline Lathe Part 1 Configuring the Sherline       SMITH, W. R.      HSM'98:N/D 34

Quick Graduated Collars   VERDIANI, DON               HSM'98:N/D 46

Two-Speed Belt Transmission         BUTZ, JACK       HSM'98:N/D 48

On Pumps and Pumping     MARX, ALBERTO            HSM'98:N/D 50

PC Board Vise     RAUSCHER, ALAN D.     HSM'98:N/D 54

Grizzly 8 Table Indexing Plates Summary     LAWSON, CLIFTON E. R.              HSM'98:N/D 58