• Size: 4.4"x2.6"x1.6" (LxWxH)
• Paddle lever dimensions: 1.2"x0.6"  (LxH)
• Power:  9 Volt alkaline battery (not included)
• Power "ON":  Push-button on enclosure top; red LED indicator
• Auto-Power-Off (APO):  Shuts off after approximately 8-minutes of inactivity; reset timer by touching paddle or by pressing Power "ON" push-button
• Adjustment:  Independent "dot" and "dash" sensitivity
• IR LED: Mounted on enclosure top

IR Receiver Unit

• Size: 2.6"x2.6"x1.2" (LxWxH)
• Power:  9 to 12 Volts DC @ 10 mA; internal diode protects from accidental polarity reversal
• Front panel: ON/OFF toggle switch; red LED "POWER ON" indicator 
• Power connector: Rear mounted/Positive (+) center pin; accepts 5.5mm OD x  2.5mm ID plug (RS 274-1573, or optional PP-1 Power Plug)  
• Paddle outputs: 2 rear mounted; accepts 3.5 mm stereo plug  (RS 274-284)
• Paddle output (electrical): Open NPN collector switched to ground; maximum ratings 40 Volts and 200 mA  
• A/B radio selection: Slide switch on rear of IR Receiver Unit

PS-1 (optional) Power Supply

• 120 VAC  60 Hz AC adapter
• Output:  9 VDC @ 300 mA
• Connector: 5.5mm x 2.5mm  plug
• Cable length: 6 feet
• UL & CSA approved