Bandai’s
1/100 Gundam Wing DeathScythe Hell Review and Photos
Overall:
This kit is probably one of the simplest HG kits in the 1/100 Wing line. The
body breaks down into basic components: upper & lower torso, upper &
lower arms, upper & lower legs, head and rocket pack. The only gimmick for
DSH is the "Active Cloak", or the trademark bat wings. The weapon
included with the kit, the "Beam Scissors" or "Beam
Scythe", is ridiculously huge and badly balanced in its plastic form. At
first glance, and judging from the pictures on the side of the box, this kit
looks ridiculously bulky with the wings in the down position. However, seeing
the completed model in three dimensions has changed my impression. Especially
compared with the screen shot of DSH with the active cloak bat wings closed
available at http://pictures.gundamw.net/ep38pics.html, the plastic captures the form
of DSH extremely well. The only major complaint I have about this kit is how the
bat wings are mounted to the shoulders--more on that later.
This kit follows the standards seen in
the other Gundam Wing HG kits. All parts are molded in color, as they should
be, except the white parts are light gray and the black parts are different
shades of dark blue. There is a mix of trim parts such as thrusters, the hands
the rocket backpack etc. that are molded accurately in various shades of dark
or grays. Again knit lines are present in some of the larger parts such as the
wings in shoulder armor, but they are not extremely obvious. The ejector pin
marks on the double-sided pieces such as the bat wings are generally shallow
and easy to fix with putty or white out. The hip armor skirt is undetailed as
usual for these kits but this is not as big a problem as with the Altron kit,
for example. Since the hip armor pieces are very deeply engraved, the engraving
pattern from the outside is visible on the inside of the skirt. This gives the
appearance of any internal framework which when painted black is very passable.
This kit does not suffer from extensive hollow parts, with the exception of the
spike on the Buster Shield and the "Peter Pan" toe spike things. The
PV caps are also typical of a Wing HG kit; the knees are fairly concealed, though
not as well as Altron. In the few lunging poses DSH can get into, the knee PV
and pegs are actually visible. The elbows are totally exposed, as usual for an
HG kit. The batwing mounting block PV caps are exposed; however I don't
consider it worth the trouble to try and hide them.
Arms:
There is nothing special about the arm construction for this kit. The lower arm
has the typical ball socket for the hand and a pivot joint at the elbow. The
upper arm has a lower PV pivot joint and an upper PV receiver for the torso arm
mounting peg. The white upper arm is trapped between the two black shoulder
halves, and should be painted prior to assembly. The upper arm to shoulder
connection is plastic on plastic hinge, and probably should have a buffer such
as Teflon tape between the plastic pieces to prevent excessive wear. On my kit,
the upper arm/shoulder hinge is so tight I have a lot of trouble positioning
the arm away from the body due to painting the upper arm prior to assembling
the shoulder halves. Like I said, this kit is about as simple as a 1/100 HG
Gundam Wing kit can get. And as expected for this series, the hands are pretty
lame.
Active
Cloak: DSH's signature feature is the bat wing like active cloak panels. When
fully spread, it gives Duo's ride a demonic demeanor. My main complaint about
this kit is how the active cloak panels are attached to the kit. Rising up out
of the torso between the neck and a shoulder joint is a curved beam, which is a
mostly accurate copy of the Anime DSH. One particular detail that will drive
the glue and putty crowd crazy on this beam are the small twin triangular fins
on the torso side of the beam. Due to the draft angle (this is a model
production term used to describe the surfaces that are perpendicular to the
main surface of the mold) the small triangular fins have a serious mold line
and undercut problem. When the beam is assembled, the space in between the
small triangular fins has a large depression which is hard to sand because the
small fins are in the way. The good news is the small fins are not actually on
the animated version. So, cut them off and putty to your hearts content.
This beam can pivot slightly in and out
from the head. At the end of the beam is a box that measures 3/4 of an inch by
3/4 of an inch square, and about 3/8 in. high. This box has three PV pivot
joints for the front and back bat wings and the side shoulder guard. The
problem is this box is huge! Though it is hard to see in the Anime, you don't
really get the impression that DSH's bat wings are hanging off a huge,
rectangular block. The animated version seems to be much more graceful and
slender. Since such silly things as reality or building a physically realistic
object do not limit the animators, they can get away with it. Unfortunately,
Bandai had to come up with something that would physically realize the bat
wings and still maintain the cost and level of detail seen in HG kits. I'm not
sure this is the best they could've done. I look that shaving down the box
dimensions, but with the PV pivots supplied there really isn't much room for
improvement without some major surgery. Since I was more interested in
finishing this puppy pretty much out of the box (and quite frankly it's not my
favorite kit in the series), I left the boxes as they are. If I get bored I
might go back and rebuild the boxes to be a little more slender.
One question I had about the kit was the
ability to pose the bat wings. On the box pictures, the wings are seen
basically locked closed or straight up when open. In the anime, the wings actually
never point straight up when open—they point out to the side noticeably. This
pose can be done easily by raising the wings about halfway so they stick
straight out front. With the wing tips pointing right at you, rotate the wings
on their pegs a few degrees so the inside edge of the wing goes up and the
scalloped edge goes down. When you raise the wings the rest of the way, they
will not be able to extend all the way up, but will point out more instead of
up.
Legs: The feet assemblies are one
of the more complicated bits on the kit. The feet are made up of 2-part sole
including heel with a ball joint, a foot topper and a pivoting ankle guard.
They buildup cleanly; however there is a color problem. On the back of the sole
part there is a vertical block that should be dark gray, not black like the
rest of the foot. This can easily be hand painted after the sole is assembled
and painted black, with a panel line pen to clean up where the colors meet
(gotta love a black kit!). Prior to gluing the sole together, it might be
worthwhile to fill in the hollow toe spike (which remind me of foofy medieval
curly toed shoes--DeathScythe Custom even more so!). I wouldn't use styrene
here, as the two spikes are so close together the extra thickness would be
noticeable. I ended up using Milliput; again it's too deep to use solvent type
filler here. The foot soles have a poor mating surface, which results in a fair
amount of work to make decent. This is typical of the 1/100 GW kits I have
seen--the mating surfaces on the foot soles are slightly concave, leaving a
nice canyon right down the middle. I just grind all the detail off, then use
sheet styrene to scratchbuild the simple geometric shapes.
After the soles are built and painted,
the rotating ankle guard can be put on. I assembled mine, then masked the black
foot. The ankle guard can be a bit tricky to get on evenly; you might do better
by removing the locator pins and just gluing it. My sample took some putty work
and panel line scribing to get looking decent. After it is cleaned up and
painted, the foot topper can be painted and plopped on easily--no glue
required. The detail on the side of the foot topper is mushy, a victim of draft
angle. The ankle joint looks fairly exposed when the foot is off, but between
the rotating ankle guard and the gray block on the back of the sole, this is
one of the best concealed HG ankles I’ve seen.
The calves are straightforward; the 2
halves trap the ankle and lower knee PV caps. My sample only required putty to
cover sprue scars. The kneecap armor plates fit on cleanly. I suggest leaving
them off until after painting, since getting around the plates with a spray can
or airbrush is not terribly practical.
The knee
blocks and upper legs are practically identical to the other GW 1/100 kits. The
knee blocks cover the PV caps nicely, and have decent flexibility. However, the
opening in the front of the thigh is cut too high, and when the knee is near
maximum bending, the PV joint is visible. I realized this too late to spend
time correcting (I suspect you would have to relocate the PV hinge to the rear
of the thigh--MAJOR surgery). The knees can bend up to ~75°, though you may not
want that much "leg" showing. The hip armor is also typical;
independent front skirts on ball sockets, independent hinged side plates and a
fixed rear plate. The fixed rear plate is a real problem, unlike Altron. I am
unable to get DSH into a good lunging scythe swing pose because I can not pose
the rear leg back far enough to balance the kit. The good news is that even
with the active cloak wings, DSH is very stable in the few poses he can strike.
Weapons: DSH is on the short range side of GW mecha.
Only Epyon or Sandrock come to mind as having less reach. DSH is armed with
essentially three weapons: A double beam scythe, head Gatling cannons, and a
shield with crusher claws and a beam blade. The longest reaching of these is
the shield, which can either crush the enemy with the large claws, or slice
with a rather large beam blade. DSH can either swing it as a melee weapon, or
shoot it off his left arm--it has rocket motors (this immediately should bring
images of "Giant Robo Rocket Fists", but it isn't THAT cheesy). I am
fairly certain the head Gatlings are used in the anime, but it’s nice to know
they're there.
DSH's signature hand weapon is the
"Beam Scythe" or "Beam Scissors". The DSH beam scythe is
different from the regular DeathScythe by having two parallel beam scythe
blades. Apparently having one blade that can cut through anything like butter
wasn't quite enough. When assembled, it bounces between looking really menacing
and really stoooopid. When I decided between the earlier and later incarnation
of DeathScythe, one of the deciding factors was the Scythe. It’s the times I
remember that decision I like the double scythe. Like the Altron 1/100 kit, DSH
includes both an extended, full length Scythe and one that is neatly folded
(with the staff portion gone--just the beam holder). The neatly folded one can
be stored on a brace on the rear hip armor skirt. The folded up one in no way
could possibly extend the length of the full size one--another bit of GW
techno-magic.
The scythe itself is well articulated.
The inner, shorter beam plugs into a simple pivot mount, which allows you to
position the blade anywhere from straight out from the staff to in line with
the staff. The outer blade mounts to a similar rotating plug. The outer plug in
turn is connected to the main staff by a link which allows you to move the
outer blade up or down relative to the lower blade. You can even fold the head
of the scythe up to match the stowed version. Kind of neat. I used liberal
Teflon tape to stiffen up all the rotating and linked components--the beam blades
are somewhat heavy, and you don't want droop. The scythe also has a charming
little rocket motor on the beam holder portion. I guess that is so you can
REALLY whack a Leo with a Beam weapon...
The crusher shield is pretty well done.
The claws are internally geared to open and close together. Take the time to
fit the claw gears both ways. On my sample switching the claws to the other
side meshed the gears so they would close all the way properly. The claw
portion is separate from the decorated gold and red top plate, so painting is a
breeze. I painted the claws Testor's non-buffing steel, then dullcoated them
for protection. I also sanded the inside of the claw housing so the blades
would clear without scraping the paint off when opened and closed.
The gold and red top plate has a spike
sticking out of it, which is unfortunately hollow. A little sheet styrene fixed
that fin. I painted the top plate dark red first, then brushed Testor's bright
brass on for the gold cross and trim. Any minor errors disappeared under my
Micron Pigma pen. A quick note: the side "wings" on the shield have
some engraved detail that the box pics and sticker sheet show to be red with
gold trim. My study of numerous screenshots from http://pictures.gundamw.net and episodes show these wings
are plain black. I choose to leave them black too (heck of a lot easier!).
The rocket exhausts in the rear of the
shield are plain affairs, and plug into the rear of the shield. Unfortunately,
the plug they attach to is highly visible when viewing the shield from the
rear. On the plus side, there is so much armor in the way it is next to
impossible to see the rear of the shield anywho.
The Beam portion of the blades on the
scythe and the rocket shield are made of a soft, translucent green plastic.
This is similar to the softer stuff the other colored beam parts I've seen, so
I suspect it’s all the same stuff. Straight off the tree, the blade looks
horrible. Its has some wavy edges and "flame" details on the surface,
but in no way looks like a uniform sheet of energy.
If you try to clean these parts up with
sandpaper or X-acto knife, you end up with ugly scars and scratches on fake
looking clear plastic. I accidentally came up with a solution I liked when
removing excess paint from the soft green plastic of the eyes. I was using a
toothpick dipped in brush cleaner to scrape the paint away and realized I was
tearing up the eyes!
I quickly switched to rubbing alcohol,
but realized this may work on the beam blades. I took the blade for the shield
and dipped it in acetone. About ten seconds or so--don't leave overnight. This
will instantly "fog" or craze over the clear green, but it will still
stay translucent. Now when light hits the beam blade, the whole blade will
softly glow (instead of just the edges glowing). If you look at the pictures in
the instruction manual, this look is a lot closer than the clear glossy look it
has straight off the parts tree. In the picture below, the upper blade has been
crazed; the lower is a regular unmodified blade.
Note: Not all of the green will craze. For some bizarre
reason, some small patches of the blade will not be affected by the acetone. To
make the whole thing craze evenly, dip an old sock into the Acetone and rub it
into any areas that are still glossy. Place the beam blade on a hard flat
surface not affected by acetone, since rubbing it with acetone temporarily
weakens the blade and can cause it to break. Once the Acetone dries, the blade
will be back to normal strength, maybe a little harder.
Yes, the acetone chews up the beam blade
plastic, and as you rub the acetone soaked sock into the blade, it will grind
up the blade a LITTLE. However, this also helps get rid of those pesky injector
pin marks. And if you trim down the ejector pin marks before dipping, they
disappear altogether. If you have any doubts, try it on an old blade or piece
of sprue. With a little practice, you can control the amount of crazing and get
a really nice glowing blade effect.
Miscellaneous:
The head of the kit, like Altron, is one of the real strong points. It captures
the lines, is well detailed, and paints up great. At certain times it almost
looks too small, but I think that's just me. With the silver trim and the head
cannons painted gold or bright brass, it looks very elegant in a Nazi
stormtrooperish sort of way. Did that make any sense? Actually, given the
fearsome name, the head of DSH isn't really that scary, but certainly is
no-nonsense. The only other feature of note are the “Hyper Jammers”, which are
those snorkel like things on either side of the head. The obviously don’t work
any better than the rest of the active cloak, or Duo never figured how to use
them, because he’s always getting pasted by anybody who can shoot. The jammers
are attached to the backpack, which has a rather large rocket nozzle stuck out
the back. The backpack is hollow on the inside, and hangs down low enough off
the torso you can see into it. This is easy to fix with--you guessed it--sheet
styrene.
Remember I thought this kit was a lame
build, modeling skill wise? Well, I had been toying with the idea of lighting
up the eyes ever since I saw this kit had clear eyes. To see how I dealt with
it and the results, go here.
For the
money, this is a great kit. I’m not the world’s biggest “
Ratings (for unmodified kit):
Value: 10
Ease of build: 10
Execution of overall design: 9
Detail: HG
Gimmick execution: 5
Weapons: 9
My DeathScythe Gallery
Front w/Scythe 1 Front w/Scythe 2 Front
w/Scythe Wings Closed Face Close-up Front, Buster Shield Front,
Wings Spread, Eyes Lit Wings open, Eyes lit 2 Rear
