|
| 1970-76 DUSTER, VALIANT, DEMON, DART RADIO DELETE |
|
|
| 1966 chevy II NOVA radio delete |
MANY OF THESE CASTINGS
CAN BE CHROME PLATED, THEY ALL CAN BE PAINTED. LACQUER THINNER WILL NOT HARM THE MATERIALS. THE CHROMABLE
PARTS WILL WITHSTAND APROX 210 DEGREES WITHOUT WARPING.
A PHOTO
OF ANY PART IS AVAILABLE ON REQUEST!
AMC
1969 RAMBLER RADIO DELETE PLATE
This is one of 2 styles for the 69 Rambler, this has a curved raised edge with
plastic grain center, in black plastic. 7+1/8" at the bottom edge (down to 6+1/2" at the top edge) x 2" wide.
Mounting studs are 5+3/4" on center $30.00
1969 AMC HURST S/C RADIO DELETE PLATE
This is a plain edge grain texuture plate, slightly larger than the 69 Rambler
plate above, and is best for the AMC Hurst S/C. 7+1/2" X 1+7/8" wide, 5+3/4" on center studs. $30.00
BUICK
1966-67 BUICK GS,GSX,or SKYLARK RADIO
DELETE PLATE CHROMABLE!!
The original was chromed steel, this is cast in chromable plastic, excellent
copy! $34.00
1968-72 BUICK SKYLARK GS RADIO DELETE PLATE
This fits the 68 Skylark, GS, and Custom Sportwagons. Includes the impossible
to find mounting brackets! $34.00
CHEVROLET
1958-66 IMPALA NOVA SS CORVAIR 4-WAY HAZARD FLASHER TRIM COVER
This piece was fairly universal on many years, cast from an NOS mint part! Installs "under
the dash" for your 4-way flashers. CHROMABLE! $16.00
62-64 CHEVY II NOVA RADIO DELETE PLATE CHROMABLE!!
This will fit all years from 62-65, but the face ribbing is
only correct for the 62-64... beautiful piece impossible to find an undamaged original! STUDS ARE FRAGILE PLASTIC, I
WILL REMOVE AND EPOXY ON METAL STUDS FOR ADDITIONAL $6.00 38.00
1962-66 CHEVY NOVA STATION WAGON WHEEL WELL LATCH COVER SET (2)
This is an excellent set of rePros... same grain finish as the originals. Available
in TAN, BLACK, GRAY, or WHITE. Holes are pre-drilled $34.00
64 CHEVELLE + MALIBU RADIO DELETE PLATE CHROMABLE!!
This is an excellent repro! The fins are crisp and straight. Mounting bosses on the back
are fully intact. $34.00
1965 CHEVY BISCAYNE, IMPALA,RADIO DELETE PLATE
This is cast in satin black plastic, the original had a semi-flat black
finish with silver lettering, you will need to hand paint the lettering if desired, or simply paint to match your dash. $30.00
65 CHEVELLE + MALIBU RADIO DELETE PLATE CHROMABLE!!
This is an excellent repro! The fins are crisp and straight. Mounting bosses on the
back are fully intact. $34.00
65 CHEVY II NOVA RADIO DELETE PLATE
includes brackets! CHROMABLE!!
This will fit all years from 62-65, but the face ribbing is only correct for the
65... beautiful piece impossible to find an undamaged original! STUDS ARE FRAGILE PLASTIC, I WILL REMOVE AND EPOXY ON
METAL STUDS FOR ADDITIONAL $6.00 38.00
1966 CHEVY BISCAYNE, IMPALA,RADIO DELETE PLATE
This is cast in satin black plastic, same ribbing on the face. Due
to the age of the original it was molded from, the mounting studs will show on the front as slight indentations
in the ribbing. This is completely normal for these plates due to how thin they were, age shrinkage, etc. $36.00
1966 CHEVELLE 300,MAILBU,EL CAMINO RADIO DELETE PLATE
This will fit the 300 and 300 deluxe models of chevelle, malibu, and el camino. Metal studs
are epoxied in place, cast in a hard task series plastic. Paint grade, XLNT. $34.00
66/67 CHEVY II RADIO DELETE PLATE CHROMABLE!!
This has the CHEVY II letters in the center and 4 mounting tabs on the rear fully intact.
Beautiful piece, impossible to find an original! $38.00
1966/67 CHEVELLE HEATER DELETE PLATE
cast in paint grade black plastic from an original factory core, BRACKET IS INCLUDED! $36.00
1967-68 CAMARO RADIO DELETE PLATE
This is cast in black plastic. Same grain finish as the original. I
can cast in BLACK, WHITE, or GRAY $34.00
1966 CHEVELLE RADIO DELETE PLATE CHROMABLE!!
This piece is correct for the 66 but will also fit the 67. The
major difference was the 66 had a plain face rather than ribbed. It is an excellent part, all the edge details and CHEVROLET
lettering are perfect. Chromable or can be painted. $38.00
1967 CHEVELLE RADIO DELETE PLATE CHROMABLE!!
This piece is correct for the 67, but will also fit the 66. The
main difference is the 67 had a ribbed face rather than plain. It is an excellent part, all the ribbing and CHEVROLET
lettering are perfect. Chromable or can be painted. $38.00
1968 CHEVELLE RADIO DELETE PLATE
Cast in solid black plastic, the raised rim can be painted
silver with a Krylon Silvering Pen for a nice original look. A correct repro BRACKET
IS INCLUDED! $36.00
1969 CHEVELLE RADIO DELETE PLATE
This is extremely rare to find as an original! Complete with bracket! $36.00
1969 CAMARO RADIO DELETE PLATE
Cast in solid black plastic, the raised rim can be painted
silver with a Krylon Silvering Pen for a nice original look. $42.00
1969-72 NOVA RADIO DELETE PLATE
Cast in solid black plastic, the raised rim can be painted
silver with a Krylon Silvering Pen for a nice original look. $42.00
1970-72 CHEVELLE RADIO DELETE PLATE
This is cast in black satin plastic, plain face for sweep
speedo style dash. Simply leave as is or paint
to match your dash. $32.00
1970-72 CHEVELLE SS STYLE RADIO DELETE PLATE
This is cast in black plastic, leather grain style
for the SS round gauge dash. Simply leave
as is or paint to match your dash. $36.00
1970-72 CHEVELLE A/C DELETE PLATE
This piece is cast in black satin plastic, the lettering and raised rim can be painted silver
(Krylon Silver Leafing Pen is great) or installed as is. $28.00
1970-76 CAMARO RADIO DELETE PLATE
This is cast in black satin plastic. Same grain finish and
CHEVROLET logo as the original. Simply leave as is or paint to match your dash. $40.00
1977-81 CAMARO RADIO DELETE PLATE
This is cast in black satin plastic. Same grain finish and
CHEVROLET logo as the original. Simply leave as is or paint to match your dash. $40.00
1936 CHEVY RADIO DELETE PLATE
Hard to find this one without damage or rustout. Cast from a mint original, nice
detail. $16.00
DODGE
1964 DODGE PUSH BUTTON TRANS DELETE PLATE CHROMABLE!!
For B-bodies (330's, 440's + 500's) Cast from an original, mounting holes pre-drilled. You
need this plate to convert to a Max Wedge or Hemi clone with a 4-speed or console shifter for an original look.
$34.00
1964 DODGE PUSHBUTTON TRANS PLATE CHROMABLE!!
This is a reproduction of the original pushbutton
transmission plate. The mold was made from a mint original as always. $34.00
1964 DODGE POLARA HEATER DELETE PLATE CLONE
CHROMABLE!!
Original 64 Dodge Polara heater delete plates are extremely rare and command a premium price. ($500 and UP!)
This part is cast from a stock heater plate which was customized by filling the 2 middle holes and the slot,
then tooling in the ribbed detail to the filled areas with the correct number of ribs per inch. Mounting holes are also pre-drilled.
THIS IS VERY NICE BUT NOT PERFECT. A PERFECT CASTING WOULD REQUIRE AN ORIGINAL CORE WHICH IS IMPOSSIBLE TO FIND.
$34.00
1964 DODGE POLARA 440/500 RADIO DELETE PLATE CHROMABLE!!
Original 64 plates are very rare. This fits Polara 440's with the extra plastic trim panel on
the glove box door, and all Polara 500's. Cast from an original factory part, it is approx. 10+1/8" x
5+7/8" METAL STUDS have also been added for strength. $42.00
1966/67 DODGE CHARGER & CORONET RADIO DELETE PLATE
This is pressure cast in solid black urethane plastic, all factory markings are on backside. $38.00
1965 DODGE CORONET 500 RADIO DELETE PLATE CHROMABLE!!
This is an excellent piece, pressure cast in chromable plastic...same size and shape as the original
core. I have epoxied 4 metal studs on the back to replace the brittle plastic ones that always broke. $42.00
1966/67 DODGE CHARGER INTERIOR REAR LENS (2 pc. set, L+R)
This lens set is pressure cast in white opaque urethane plastic, they are the exact size and shape as factory
parts! $42.00
68/69 DODGE CHARGER DEFROST DELETE PLATE
This is the small ribbed black panel with the upper left curved corner, with 4 press in studs. Pressure cast! $22.00
70-76 DODGE DEMON, DART, etc RADIO DELETE PLATE
Cast in black plastic from an original factory part, it has the simulated leather texture,
very nice detail, fits many vehicles, email me with your app. $30.00
FIAT
600 HORN BUTTON
Cast from an original piece in your choice of black, white, or gray. Looks and fits exactly
like an original horn button $18.00
FORD
1948-50 FORD TRUCK RADIO DELETE PLATE
CHROMABLE!!
This was cast from a rare and perfect original factory core. Brackets are
included! This was one of the first plastic deletes! $32.00
1963-4 FORD GALAXIE CLOCK DELETE PLATE
This is a 2-piece unit, cast from original factory cores. Very nice piece, paint
to match your interior. $22.00
1963-4 FORD GALAXIE RADIO or HEATER DELETE PLATE
This is the matching piece to the clock delete, same look, just longer to cover the radio
hole. It is the same piece for radio or heater delete $24.00
1963-64 FORD GALAXIE XL 427 RADIO DELETE PLATE CHROMABLE!!
This piece is the chrome trim with the ribbing. It is cast in a
high heat tolerant material that can be chromed. $32.00
1964 FORD FAIRLANE THUNDERBOLT RADIO DELETE PLATE
CHROMABLE!!
This is a VERY RARE piece to find. Curved, plain face, cast from
an original core. Beautiful part! $34.00
1964 FORD FAIRLANE THUNDERBOLT HEATER DELETE PLATE
CLONE CHROMABLE!!
This is a VERY RARE piece to find. Curved, plain face, re-worked from
an original heater plate core by filling the slots and lettering. Beautiful part! $34.00
DETOMASO PANTERA RADIO DELETE PLATE
Originals are VERY rare! This piece mounts vertically, and is cast in solid black
urethane plastic. Awesome replacement! $34.00
64/65 FALCON+RANCHERO RADIO DELETE PLATE
This is the plain jane version (no logo) and will fit 64/65 falcons with the standard
trim package. Paint grade. $30.00
64/65 FALCON+RANCHERO RADIO DELETE PLATE (RIBBED STYLE WITH FALCON
LOGO)
This has the ribbing detail as well as the falcon bird logo. Paint
grade. $30.00
1964-65 FALCON HEATER DELETE PLATE
This will cover the hole in the dash where the heater controls are on AFX or BFX vehicles
and is correct for 64-65 Comet and Falcon, and 65-66 Mustangs. A factory heater control plate was filled and smoothed to
make the mold for this part. All dimensions are the same as the original,PLUS metal studs are epoxied in for you!
1962 FULLSIZE FORD RADIO DELETE PLATE
This will fit 62 galaxies, etc... but check your dimensions before ordering. Size
is 8+15/16" x 2+1/8". Studs are 7+7/8" on center. $20.00
1965 MUSTANG RADIO DELETE PLATE
This is a rare piece,
it has the ribbed center panel and would be perfect for a series racer or trans am car. $30.00
1966 MUSTANG RADIO DELETE PLATE
This is very similar to the 65 plate, only with a slightly different
outer dimension due to a change in the dash pad for that year. $30.00
1965-66 MUSTANG HEATER DELETE PLATE
This will cover the hole in the dash where the heater controls are on AFX or BFX vehicles
and is correct for 64-65 Comet and Falcon, and 65-66 Mustangs. A factory heater control plate was filled and smoothed to
make the mold for this part. All dimensions are the same as the original,PLUS metal studs are epoxied in for you!
$30.00
1966 FALCON RADIO DELETE PLATE
This is a really nice plate with the 3 raised falcons on the
face plus ribbing detail. $30.00
1965/66 FORD GALAXIE 500 + CUSTOM CLOCK DELETE
PLATE
Cast from an original plate in 2 separate parts (main face and emblem)
to look very original. This will fit all fullsize 65/66 Fords but not LTD or XL as radios were standard. Paint
either black or argent silver to match your dash and year. $28.00
1969 FORD MUSTANG MACH-1 TACHOMETER BEZEL
This piece is cast in solid black plastic, it can be installed as
is or painted if needed. $36.00
1971-73 FORD MUSTANG MACH-1 CLOCK DELETE PLATE
This piece is cast in solid black plastic, it can be installed as
is or painted if needed. $32.00
HUMMER
HUMMER H-1 DOOR SWITCH BEZEL (FRONT OR REAR)
This piece always breaks at the screw holes...RETAIL price on these from
GM is $115.00 EACH! This piece is cast under 60 lbs. pressure in a strong Task series solid black urethane plastic.
The molds were made from original parts, all dimensions and details are the same. $28.00
EACH or $100.00 FOR FULL SET OF FOUR
MG, MGB, MGA, TD
RADIO DELETE PLATE CHROMABLE!!
I believe this is for MGB but may fit other models. Cast in 2 parts (back plate and insignia
plate) Email me for dimensions and photo! $28.00
MERCURY
1965 COMET RADIO DELETE PLATE CHROMABLE!!
This is an excellent piece, pressure cast in heat tolerant plastic, or your choice of
paint grade plastic. Originals are EXTREMELY rare!! $48.00
1964-65 COMET HEATER DELETE PLATE
This will cover the hole in the dash where the heater controls are on AFX or BFX vehicles
and is correct for 64-65 Comet and Falcon, and 65-66 Mustangs. A factory heater control plate was filled and smoothed to
make the mold for this part. All dimensions are the same as the original, PLUS metal studs are epoxied in for you!
OLDSMOBILE
1965 442 Cutlass RADIO DELETE PLATE
This is an excellent piece, pressure cast in solid black task series plastic...same size
and shape as the RARE factory plate the mold was made from! Please NOTE: the circular mounting studs show on the face as slight
indentations of the ribbing, this is normal. $38.00
1966/67 442 RADIO DELETE PLATE
This is an excellent piece, pressure cast in solid black task series plastic...same size
and shape as the RARE and MINT factory plate the mold was made from! $38.00
1966/67 442 A/C DELETE PLATE
This is a great match for the radio delete plate, pressure cast in solid black
task series plastic...same size and shape as the factory plate the mold was made from! $30.00
PLYMOUTH
1964 PLYMOUTH or DODGE RADIO DELETE PLATE
The original was a thin stamped sheet metal painted panel. The mold was
made from an original factory core. It is pressure cast in urethane plastic. The back mounting tabs are solid
filled for strength. Can be painted like any typical interior trim piece. Sent in rough primer.
$36.00
64 PLYMOUTH SPORT FURY/SAVOY/BELVEDERE PUSH BUTTON DELETE
PLATE CHROMABLE!!
Very fine detail in the ribbing and emblem. Cast from an original. Mounting holes pre-drilled.
This is pressure cast in High-Temp material, fully chromable or also can just be painted. $34.00
64 PLYMOUTH SPORT FURY/SAVOY/BELVEDERE HEATER CONTROL PLATE CHROMABLE!!
This is the full heater control plate with all the 4 holes and slot. Cast from an original core. $34.00
1963 PLYMOUTH BELVEDERE, FURY, & SAVOY RADIO DELETE PLATE
This is cast in a task series plastic, it is paint grade, semi-rigid, and will fit your dash perfectly! $32.00
1964-66 PLYMOUTH BARRACUDA & VALIANT RADIO DELETE PLATE
This is also cast from an original factory core in paint grade task series urethane plastic.
Perfect fit! $24.00
1963 PLYMOUTH PARK LEVER DELETE PLATE
This is for non-automatic cars (3 +4 speed) It is the small delete plate that blanks out
the factory park lever hole. Cast from an original factory core in paint grade task series urethane plastic. $24.00
64 PLYMOUTH SPORT FURY/SAVOY/BELVEDERE PUSH BUTTON TRANSMISSION PLATE
CHROMABLE!!
This is for the stock push button trans guys!Cast from an original. Mounting holes pre-drilled.
This is pressure cast in High-Temp material, fully chromable or also can just be painted. $34.00
64 PLYMOUTH HEATER DELETE PLATE CHROMABLE!!
This mold was made from an EXTREMELY rare original piece, loaned to me by a Mopar restoration expert. This
part is pressure cast in heat resistant material, and oven cured. It can be chromed or painted. $34.00
1962-63 PLYMOUTH HEATER DELETE PLATE CHROMABLE!!
This plate installs behind the heater buttons and blanks out the middle 2 buttons
and long slot. Very rare to find an original anywhere! $32.00
1966/1967 BELVEDERE GTX RADIO DELETE PLATE
Here is a radio delete plate for your 1966 - 1967 Plymouth Belvedere, Satellite, GTX
$32.00
70-76 DUSTER,VALIANT,etc...RADIO DELETE PLATE
Cast in black from my original core, it has the simulated leather texture, very nice detail,
pushnuts included. Fits many models, check your app and email me! $30.00
MOPAR CONSOLE SHIFTER SLIDE (fits MANY years and applications!)
Here is a nice repro piece for your MOPAR, the automatic console shifter slide,
which fits around the shifter and slides on the inside of the console. There are 2 styles available, ROUND or SQUARE
hole. They will fit many different years and models. I believe the following information is correct. PLEASE NOTE:
IF YOU ARE CONVERTING TO A PISTOL GRIP SHIFTER YOU WILL NEED THE SQUARE HOLE.
64-66 A bodies (Valiant, Dart, Barracuda) = square hole
64 B bodies (NOT CONFIRMED)
66-68 B bodies (GTX, Barracuda, Challenger,
etc.) = round hole
70-74 E bodies (Barracuda, Challenger, etc.) = round hole $18.00
1961-62 PONTIAC STEERING COLUMN SHIFT DELETE PLATE
This is a 2-piece unit, pressure cast. VERY difficult to find an original that is not pitted badly.
$28.00
1963 PONTAIC SHIFT WINDOW DELETE PLATE
This is just the block-out window, originals are VERY RARE!! $28.00
CHROMABLE!!
1963 PONTAIC RADIO DELETE PLATE
This is pretty nice! Originals are few and far between... $34.00 CHROMABLE!!
1963 PONTIAC BACKUP LIGHTS DELETE PLATE SET
This is a 2-piece set, your choice of chromable or paint grade plastic,
both are strong materials although the paint grade is not as high-heat tolerant. $38.00 CHROMABLE!!
1964-65 PONTAIC TEMPEST GTO,LEMANS,RADIO DELETE PLATE
The original was steel, this is pressure cast in your choice of BLACK,
GRAY, WHITE or BLUE. Excellent copy, even has factory casting numbers intact on the backside! $30.00
1964-65 TEMPEST, GTO,LEMANS,BACKUP LIGHTS DELETE PLATE SET
This is a 2-piece set, your choice of chromable or paint grade plastic,
both are strong materials although the paint grade is not as high-heat tolerant. $38.00 CHROMABLE!!
1966 TEMPEST RADIO DELETE PLATE
Cast in your choice of BLACK or GRAY plastic, same leather grain
textured finish as the original, exact reproduction even including the factory casting numbers on the back! $32.00
PORSCHE
911/912 RADIO DELETE PLATE
This is a flat plate in the correct dimensions as the original, no "porsche" lettering is
visible on this plate but finish is very shiny and fits perfect. $18.00
TOYOTA
TOYOTA LANDCRUISER FJ40 RADIO DELETE PLATE
This will fit all early FJ's, but not the 83-86 models. Same textured finish and
details as original. The edge can be left black or just paint it silver. $36.00
1966-67 DODGE CHARGER REAR COURTESY LENS SET
ABOVE: 67 CHEVELLE RADIO DELETE! I ALSO MAKE THE 66
| FJ40 Radio Delete fits all except 83-86 |
|
|
| Perfect detail, exactly like an original!! |
|
