Windy Ridge Farm

Hydraulic Conversion Kits
Order Number Description Cost
HH-PMK-BD

Basic belt drive pump mounting kit for Ford N-series tractors equipped with a front distributor. Consists of timing belt drive, pump mounting brackets, and all hardware needed to install the kit on the tractor.

Does not include a pump or any hydraulic components.
$200.00
HH-PMK-SD

Basic shaft drive pump mounting kit for all Ford N-series tractors. Consists of pump mounting bracket, splined shaft, and crankshfat pulley hub for mounting an SAE-A two bolt flange pump on the tractor.

Does not include a pump or any hydraulic components.
$175.00
HH-FPK-BD-AA

Basic belt drive fluid power kit for Ford N-series tractors equipped with a front distributor. Contains all parts needed to equip the tractor with 2.5 GPM live hydraulics. Consists of a basic belt drive pump mounting kit (HH-PMK-BD), a 2.5 GPM SAE-AA two bolt pump, and all hydraulic components needed to complete the conversion.

Not for use on tractors with distributor mounted on side of engine block.
$415.00
HH-FPK-BD-xx

Deluxe fluid power kit for Ford N-series tractors equipped with a front distributor. Contains all parts needed to equip the tractor with live hydraulics AND one set of remote ports. Consists of a basic pump mounting kit (HH-PMK-BD), your choice of a one of five different size SAE-A two bolt pumps, a priority flow divider, and all hydraulic components needed to complete the conversion. Remote ports for connecting customer supplied equipment are JIC 8M (pressure) and SAE 12 ORB (return/relief).

WARNING: CUSTOMER CONNECTED EQUIPMENT MUST BE OPEN CENTER OPERATION AND MUST PROVIDE PRESSURE RELIEF AT ALL TIMES PUMP IS RUNNING TO AVOID DAMAGE TO PUMP OR EQUIPMENT.

Specify pump size desired by replacing the -xx in the order number with the appropriate pump dash size from the table below.

Pump Dash Sizes
-12
(6 GPM)
-14
(7 GPM)
-16
(8 GPM)
-20
(10 GPM)
-25
(13 GPM)

$600.00
HH-FPK-FEL-A

Live hydraulics conversion kit for tractors already equipped with a front end loader mounted shaft driven "stinger" pump. Modifies the loader pump to use the internal sump on the tractor and splits the pump output into a 3 GPM priority circuit for live hydraulics (tractore test port) and an excess flow circuit for the loader control valve. Return flow from the loader circuit is routed to the tractor sump via the fill plug on the transmission.

WARNING: Designed for use with open center loader control valves with built in or external pressure relief only. See comments above

Does not include pressure or return hoses to loader control valve. Specify type and size of pressure and suction ports on loader pump when ordering

$325.00
Suction Line Filter Kit

HH-FLT-15

Spin on suction line strainer (15 PSI bypass) with engine block mounting bracket and all plumbing needed to connect to fluid power kits above. Filter element is 100 mesh stainless steel.. $50.00
Remote Quick Disconnects
HH-RMT-08

Two complete 1/2" NPT quick disconnect coupler assemblies, selector valve, breakaway mounting bracket, and all plumbing needed to connect them to the remote ports of the deluxe fluid power kit above. Suitable for mounting on rear fender or behind seat.

$165.00

Additional packages will be added to the ones listed above as we continue to develop this product. If you have a requirement for additional functionality and/or features please feel free to contact us to discuss your needs. We are more than willing to provide custom packages - please give us the opportunity to quote a solution tailored to your specific needs.