WE Experimental Data Phone Card Readers

Beginning in 1958, Western Electric created a series of Data Phone Card Readers aimed at satisfying 2 purposes:

1. Help speed order processing between Operating Companies and the Distribution Centers, and

2. Provide an example of a business machine that connects to a remote computer over the Data Phone Service,
to encourage business machine makers to use the Data Phone Service.

©2006-7 paulf. All rights reserved.

(What's this copyright notice?)

Data Phone Card Reader

ca. 1959

The Data Phone Subset plugged into the back of the reader, and provided the connection to the phone line. Each button push or row sensor on the card reader produced 2 contact closures, that were converted by the subset to 2 audio tones. A speaker with volume control provided feedback from the other end of the connection.

A seperate 502 set (single line with exclusion) was used to dial and provide a voice link.

Cards were placed in the carrier on the right and pushed in when ready to transmit. Each column would be read as the card carrier returned to its original position. Pre-punched cards contained codes for operator identification, destination and item description. Quantities desired were entered via the keyboard.

Trials were held in New York and Illinois. Card readers in the Operating Companies were used to place orders. The receiving end at the distribution centers had a more complex subset that converted the multi frequency tones to contact closures, which controlled an IBM model 024 card punch. Cards punched were then read into the distribution center's computer system.

(Source: "Proposed Western Electric Company Arrangement for Mechanized Ordering Using Dataphone Service," AT&T, January 19, 1959)

Keys labeled as follows:
Special    Error      0
   1         2        3
     4         5        6
     7         8        9
Order End Operator Register

     Experimental Tag

The card carriage is connected by a gear train to a standard 7D dial. When the carriage is pushed in, the dial's spring is wound up. When released, the dial spring pushes the carriage out at a rate determined by the dial's governor. No external power is required.

Look at the thickness of that metal frame!

This design was shared with about 35 office machine makers. Western Electric was looking for someone to make the units and did not want to be perceived as competing with the office machine makers.

The units do not have any model numbers or dates stamped in ink as most experimental or field trial sets do.

	Data Phone Card Reader integrated into a keyset ca. 1959 Alternate packaging using five of the keys of the keyset to provide the 5 control pushbuttons as on the reader above. This implementation provided fewer readable columns on the card than the larger version above. For the trials, 7-digit codes were typically used for employee IDs and part codes.
.
	There were some obvious physical challenges involved in getting the card reader mated to the phone! (It looks like a collision on the Interstate.)

	Data Phone Card Reader ca. 1962 Simplified design and more streamlined packaging. Capacity was increased to be able to hold a standard 80-column data processing card.
	This model has a similar heavy metal frame and uses a standard dial to push the card past the reading fingers. The button array is more compact and integrated.

	By January, 1964, the system was rolled out to several other distribution centers, including Arlington, VA. This photo is from the Illinois Distribution Center installation. The Dataphone subset can be seen plugged into the back of the card reader. (Western Electric News Features, January 1964. Scan courtesy of Wayne Merit.)
	Starting around 1961, the system also used card dialers for data input. Ordering info and item part numbers were stored on plastic cards. Quantities were entered using the phone's dial.
	Data Phone Card Reader ca. 1966 This later model was used in Tempe, AZ in an integrated data processing system that linked all schools in the Elementary School District. (Bell Telephone Magazine, spring 1966, Scan courtesy of Jeremy Walters.)

Please send comments or photos of your favorite phones to: