I personally use all stage 4 parts other then stock
brakes. I know of some that do the suspension glitch on the Zonda and
run Stage 3 suspension. My times are with the stage 4 non glitch
suspension. This Bp is based off of one from xETFx BlaZEm.
Use 1st thru 4th for 1/4 and 1/2. Do NOT
leave 4th Gear. Use spray just before 2nd.
-Engine-Stage 4
Cam - All the way left
Start Boost - All the way right
End Boost - All the way right
NOS Pressure - All the way right
NOS Flow Rate - All the way right and one click
back left
-Suspension- Stage
4
Front Shock Compression Rate - All the way left
Rear Shock Compression Rate - All the way right
Front Shock Rebound Rate - All the way left
Rear Shock Rebound Rate - All the way right
Front Spring Rate - All the way left
Rear Spring Rate - All the way right
Ride Height - All the way right
Front Roll Bar Stiffness - All the way left
Rear Roll Bar Stiffness - All the way right
Front Tire Pressure - All the way right
Rear Tire Pressure - All the way right
Toe - Default
Camber - Default
Caster - Default
Steering Response Ratio - Default
-Drivetrain- Stage
4
1st - All the way left
2nd - 3 clicks left
3rd - One click left
4th - All the way right
5th - All the way right
6th - All the way right
Final - 5 clicks right
-Brakes- Stock
Don't use them....
Contact me on Xbox 360 (Proaudio150 - Gamer Tag) or email
me at
proaudio150@hotmail.com
with questions, comments or suggestions on this car.
This site is viewed best with resolution set at
1240x768.
