The aeannotate command is used to produce an annotated listing of the named source file.
The columns specified by the user (see the --column option, below)
are used of the left hand side of the output. Two additional columns
are always added: the line number and the source code.
If no columns are specified, the default columns are
| -column | '${change date %Y-%m}' | Date | 7 |
| -column | '$version' | Version | 9 |
| -column | '${change developer}' | Who | 8 |
The $version string always contains enough information to reproduce the entire project baseline at the time of the delta. The first portion is the project branch, and the second portion (following the `D') is the delta number; use these to form the -branch and -delta options for an aecp(1) command.
At the end of the listing, accumulated statistics are presented, correlated to the unique columns values see in the listing.
The following options are understood:
-COLumn formula [ heading ][ width ]This option may be used to
specify columns you wish to see in the output.
The formula is in the for of an aesub(5) string.
The heading is a string to be used as the column heading;
defaults to the formula if not specified.
The width is the width of the columns;
defaults to 7 if not specified.
-File_StatisticsThis option causes file statistics to be appended. This lists the number of lines in the file were changed at the same time as another file. For example, this allows you to see tests associated with source files, and vice versa.
-HelpThis option may be used to obtain more information about how to use the aegis program.
-Diff_Option stringThis option may be used to pass addition arguments to the diff commands
that is run between each delta of the file. Use with caution: poor
choice of options can render aeannotate inoperable, or yield meaningless
results. Probably the best use of this option is to pass the -b
option, to ignore white space changes, because this ignores the vast
majority of cosmetic formatting changes, showing you the content changes
instead. The -i option, to ignore case, can also be useful for
case-insensitive languages.
-Output filenameThis option may be used to specify the output file. The output is sent to the standard output by default.
-Project nameThis option may be used to select the project of interest.
When no
-Project
option is specified,
the
AEGIS_PROJECT
environment variable is consulted.
If that does not exist,
the user's
$HOME/.aegisrc
file is examined for a default project field (see
aeuconf(5)
for more information).
If that does not exist,
when the user is only working on changes within a single project,
the project name defaults to that project.
Otherwise,
it is an error.
See also aegis(1) for options common to all aegis commands.
All options may be abbreviated; the abbreviation is documented as the upper case letters, all lower case letters and underscores (_) are optional. You must use consecutive sequences of optional letters.
All options are case insensitive, you may type them in upper case or lower case or a combination of both, case is not important.
For example:
the arguments "-project, "-PROJ" and "-p" are
all interpreted to mean the -Project option.
The argument "-prj" will not be understood,
because consecutive optional characters were not supplied.
Options and other command line arguments may be mixed arbitrarily on the command line, after the function selectors.
The GNU long option names are understood.
Since all option names for
aegis
are long,
this means ignoring the extra leading '-'.
The "--option=value" convention is also understood.
The aeannotate command will exit with a status of 1 on any error. The aeannotate command will only exit with a status of 0 if there are no errors.
See aegis(1) for a list of environment variables which may affect
this command.
See aepconf(5) for the project configuration file's
project_specific field for how to set environment variables for
all commands executed by Aegis.
If you wanted to list only the year against the lines of the file, use this column specification:
| -column | '${change date %Y}' | Year | 4 |
If you wanted to list the developer and the reviewer against the lines of the file (commonly called a “blame” listing) use this column specification:
| -column | '${change developer}' | Develop. | 8 |
| -column | '${change reviewer}' | Reviewer | 8 |
If you wanted to see the change cause of each line, use this column specification:
| -column | '$version' | Version | 9 |
| -column | '${change cause}' | Cause | 20 |
All of the aesub(5) substitutions are available, however
only the ${change ...} variants are particularly useful.
To see only content changes, and ignore changes in indentation (assuming you are using GNU diff), use this command:
aeannotate -diff-opt -b filename
aeannotate version 4.22 Copyright (C) 1991-2006 Peter Miller; All rights reserved.
The aeannotate program comes with ABSOLUTELY NO WARRANTY; for details use the 'aeannotate -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'aeannotate -VERSion License' command.