aegis -New_Change

aegis -New_Change_Undo
Prev	Commands	Next

Name

aegis -New_Change_Undo — remove a new change from a project

Synopsis

aegis -New_Change_Undo [option...]

aegis -New_Change_Undo -List [option...]

aegis -New_Change_Undo -Help

DESCRIPTION

The aegis -New_Change_Undo command is used to remove a new change from a project.

It wasn't called 'aegis -Remove_Change' in order to emphasize that fact the the change must be in the awaiting development state. In practice it is possible, with a combination of commands, to remove any change which has not reached the completed state.

In general, only project administrators may destroy changes. However, if the project developers_may_create_changes attribute is true, and you are a developer and you created a particular change, you may also destroy it.

Notification

This is one of the rare "state transitions" which does not have a notification command. The assumption is this command is invoked by the system which usually receives notifications. It's probably a bad assumption.

OPTIONS

The following options are understood:

-Change number: This option may be used to specify a particular change within a project. See aegis(1) for a complete description of this option.
-Help: This option may be used to obtain more information about how to use the aegis program.
-List: This option may be used to obtain a list of suitable subjects for this command. The list may be more general than expected.
-Project name: This option may be used to select the project of interest. When no -Project option is specified, the AEGIS_PROJECT environment variable is consulted. If that does not exist, the user's $HOME/.aegisrc file is examined for a default project field (see aeuconf(5) for more information). If that does not exist, when the user is only working on changes within a single project, the project name defaults to that project. Otherwise, it is an error.
-TERse: This option may be used to cause listings to produce the bare minimum of information. It is usually useful for shell scripts.
-Verbose: This option may be used to cause aegis to produce more output. By default aegis only produces output on errors. When used with the -List option this option causes column headings to be added.
-Wait: This option may be used to require Aegis commands to wait for access locks, if they cannot be obtained immediately. Defaults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information.
-No_Wait: This option may be used to require Aegis commands to emit a fatal error if access locks cannot be obtained immediately. Defaults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information.

See also aegis(1) for options common to all aegis commands.

All options may be abbreviated; the abbreviation is documented as the upper case letters, all lower case letters and underscores (_) are optional. You must use consecutive sequences of optional letters.

All options are case insensitive, you may type them in upper case or lower case or a combination of both, case is not important.

For example: the arguments "-project, "-PROJ" and "-p" are all interpreted to mean the -Project option. The argument "-prj" will not be understood, because consecutive optional characters were not supplied.

Options and other command line arguments may be mixed arbitrarily on the command line, after the function selectors.

The GNU long option names are understood. Since all option names for aegis are long, this means ignoring the extra leading '-'. The "--option=value" convention is also understood.

RECOMMENDED ALIAS

The recommended alias for this command is

csh% alias aencu 'aegis -ncu \!* -v'
sh$ aencu(){aegis -ncu "$@" -v}

ERRORS

It is an error if the change is not in the awaiting development state. It is an error if any use other than a project administrator or the creator of the change attempts to run this command.

EXIT STATUS

The aegis command will exit with a status of 1 on any error. The aegis command will only exit with a status of 0 if there are no errors.

ENVIRONMENT VARIABLES

See aegis(1) for a list of environment variables which may affect this command. See aepconf(5) for the project configuration file's project_specific field for how to set environment variables for all commands executed by Aegis.

COPYRIGHT

The aegis program comes with ABSOLUTELY NO WARRANTY; for details use the 'aegis -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'aegis -VERSion License' command.

AUTHOR

Peter Miller	E-Mail:	millerp@canb.auug.org.au
*`/\/\`**	WWW:	http://www.canb.auug.org.au/~millerp/