OIT's, HMI's, iPC's and Polymath.net SCADA Software SOLUTIONs From: ESA formerly Eason Technology

NEW ESA HMI's

www.esahmi.it 
ESA Technology USA 
ESA elettronica 
 
Polymath HMI SCADA Software
for industrial Computers iPC Workstations and
Windows CE Terminal HMI Product SOLUTIONs
 

05/02/2008
 
New   IT115 Platform 
 
 
The family of    IT Products completes its range with the introduction of the new IT115 Terminal, platform able to offer higher performance in terms of graphics, connectivity, quality/price ratio and reliability.



The    IT115 Terminal comes with a 15”, 65,000 colours TFT Display (1024x768 resolution) with 5-wire Touch, enabling precise optimal operation even in case of possible damage. The new IT115 platform combines elevated visual quality, as a result of a large 15” screen and a New CPU that has greater processing speed and utilizes faster Ram modules.

The platform comes with three USB ports, one Device port and two Host ports, one of the Host USB ports is positioned on the front for greater accessibility and ease of use of the panel. The platform is also equipped with two standard Ethernet ports to reach maximum connectivity levels with other devices, thanks to the management of two Ethernet Communication Drivers for each port.

The Audio port, equipped with a Line out audio outlet and a Mic in inlet for a microphone, is a novelty of the IT family, making it possible to fully exploit the recording and listening features of vocal messages provided by Polymath Software.

Product Overview
  • 15” TFT display with 5 wire Touch-screen
  • Greater speeds and performance with the development of the CPU (Intel PXA270 520MHz) and RAM(128M) on board
  • High connectivity with double Ethernet 10/100 Mbit - Rj45 to manage the 4 Communication Drivers.
  • Double port USB Host (1 positioned frontally) and one USB Device
  • Audio port with a Line out and Mic in audio port
  • The basic configuration is provided with SP1 and SP2 port as standard. Installation of a CAN Open and Device Net or Profibus-DP Card to replace the SP2 port is optional

    How to programme the IT115 platform?
    The IT115 platform can be programmed with the 1.3 version of the Polymath Advanced programming Software tool.
  • The new functions introduced in fact integrate with the interfaces on board:

  • Double USB A (Host) to print reports, import/export data onto USB key and connect to external peripheral units (mouse, keyboard and printer)
  • USB B (Device) for programming
  • Double Ethernet 10/100 to print and import/export data on PC on the network, display images from webcam and manage to the full 2 Ethernet drivers
  • Import/export data onto SD card (Secure Digital slot) or Flash card (Flash card slot)
  • Audio port
  • Standard SPI and SP2 for communication, also with double driver, with the most common devices (MPI included)
  • Configurations available with SP 1 + CAN Open and Device Net or Profibus-DP cards

    For further information, click on the IT115 technical sheet.
  •  


    Motors, Drives and Gears  plus Controls
    Dallas Fort Worth [N E & W TeXas Area Office], TeXas 
    DFW Office Cell (817) 307-1274
    Houston [Texas Gulf Coast & S TeXas Area Office], TeXas
    Houston Office Cell (713) 835-9753
    Tulsa [OKlahoma & ArKansas], OKlahoma