As with all
small (one man operation, in my case) “cottage industry” resin manufacturers, there comes time to reflect on our
ability to stay in business. After reviewing my expenses and profits (LOL), I have determined that the only way to continue
is increase my pricing slightly. I know it is a very bad time to do so, however, the increase in cost in just about every
aspect of my operation, I have no choice.
I want to
thank everyone that has supported me from the bottom of my heart.
Cheers,
Harold
The first sets I have are for the RF/F-84F's
Monogram/Revell F-84F and Heller/Fonderie RF/F-84F's
I offer 9 different sets for all three versions:
Early with the G type seat
Late with the AMI seat
European with the MB seat
The backdating set for the early version with the
ventral strake and small suck in doors is now available. This set fits all 1/48 scale RF/F-84F kits.
*NEW*
1/32 MB MK-H5 seats (pair) for pre '70 F-4
*NEW*
1/32 MB MK SRM6 for Revell Mirage III and later variants.
*NEW*
1/32 ESCAPAC 1C-3 ejection seat for Hasegawa A-4
*NEW*
1/32 MB MK7 seats for the Trumpter F-8
*NEW*
1/32 flaps for the Czech Model F-80 Mastered by William Lawler
*NEW*
1/32 ejection seat for Trumpeter EE Lightning
*NEW*
1/32 Exhaust tube for the Czech Model F-80C.
*NEW*
1/35 UH-1n FOD protection covers and corrected exhaust for Panda/Dragon kit.
*NEW*
1/32 scale F-4E nose correction for the Revell kit.
*NEW*
1/32 early F-8 Vought seat for Trumpeter kit.
1/32 scale F-80C cockpit set for Czech Model kits.
1/32 correct F-80 seat and joystick for Czech Model F-80 kit.
1/32 Mig 15 and early Mig 17 or Mig 17PF cockpit set for Trumpeter/Hobbycraft
kits.
1/48 Mig 17F cockpit set for HobbyBoss kit.
1/32 Martin Baker Mk5 seat for Trumpeter F-8 kit.
With belts or without.
1/48 ACMI pod...often found on F-5 Aggressors.
1/48 F-105D cockpit for the new HobbyBoss kit.
1/32 corrected nose ring and gun panels for the Kinetic F-86 Sabre (mastered
by William Lawlor)
1/32 and 1/48 F-5 duckbill nose with proper panels with LEX in 1/48 set.
1/48 Corrcted F-100 ejection seat.
1/48 Hobby Boss FJ-4 Fury update set, includes exhaust and rudder.
1/48 Cockpit set Monogram/Revell and ESCI/Italeri F-5E. Early or late
seats with or without belts.
Just added: Swiss 'pit tub for Monogram/Revell F-5E. The map case is molded
seperately.
1/32 Phantom SUU 16 with central pylon.
1/32 Phantom SUU 23A "stubby" gun pods with central pylons.
1/32 Phantom SUU 23A gun pods with central pylons.
1/48 F-5 ejection seats, both early and late.
1/32 SUU 16 Gun Pod nose replacement for TAC/scale and CAM
resin sets. dicontinued
1/32 F-86 120 gallon combat tanks.
FJ-4B Bullpup guidance pod for 1/48 Hobby Boss and Matchbox
kits.
1/32 scale MB Q7a (early) ejection seat for the Hasegawa
"Euro" F-104G and (late) German version.
FOD covers for the Trumpeter 1/32 scale F-105
200 gallon drop tanks with pylons for the 1/32 scale Kinetic
F-86 Sabre.
Full cockpit set for Kinetic 1/32 scale F-86 Sabre.
Includes: ejection seat with belts and hoses, headrest, joystick, instrument panel, gunsight, rear deck, side panels
and tub.
FOD covers for the 1/32 scale Revell Phantom II
"Short set" for the 1/32 scale Kinetic F-86.
Includes: ejection seat with belts and hoses, joystick,
gunsight, instrument panel and rear bulkhead. Designed to be used with the kits tub.
Ejection seat for the 1/32 scale F-86 Sabre, with belts and
hoses.
335 gallon tank nose replacement for Monogram 1/48 F-100,
includes RWR nose fairing.
"Sugar Scoops" for 1/48 scale F-86 Canadair MK 5/6, fits all
kits. (new masters)
200 gallon drop tanks for the Trumpeter 1/32 F-100 with correct
outer pyons
"Sugar Scoops" for the Canadair Mk5/6 Sabre in 1/32 scale,
fits the new Kinetic F-86 as well as the Hasegawa kit.
FOD covers for the 1/48 Monogram A-6.
These are corrected intakes with the canvas FOD covers molded
on.
FOD covers for the Hasegawa 1/48 F-4 Phantom. They will fit the
Monogram kit with very minor sanding. These are the hard covers with hand hold and tie down points.
FOD cover for the Monogram 1/48 F-100.
FOD covers for the Tamiya 1/32 scale F-4 Phantom II
Inserts and front tank section for the 335 gallon drop tank
for the 1/32 scale Trumpeter F-100.
The front nose section has a detailed filler and another scribed
panel that the kit is lacking. The RWR fairing is now added to the set. Trumpeter 1/32 F-100.
The insert is a plug to extend the kit tank. It is scribed
with a horizontal weld seam. The RWR fairing is now added to the set. Trumpeter 1/32 F-100
Ejection seat with belts and hoses for the Trumpeter
F-100 1/32 scale
Danish version of the MB mk DE-5A ejection seat
. Can be used in F-100 and F-86. 1/32 scale
Main gear well, large gear doors and speed boards for the
Hobbycraft 1/48 F-94, T-33, RT-33 kits.
Seamless exhaust/tail cone and vert. stab. for Matchbox
1/48 FJ-4, will fit GP kit with minor fitting. Corrected exhaust and vert stab.
Go to my Photobucket to see photos of the resin and other
goodies.
