|
FFCobra.com has lots of great information and ideas. Someone made a storage box that goes below the trunk floor, so I decided to
make one also ("Imitation is the sincerest form of flattery").
Fit check of the trunk box:
The trunk box lid has to be double-hinged to clear the body.
Because the heater takes up all the space behind the dash on the passenger
side, there's no room for a glove box in the "traditional" area. I want a lockable storage area, so I made an glovebox
in the trunk that is accessed via a door in the back of the cockpit, between the seats.
Glove box with door open:
Glove box with door closed:
Finished glove box:
Before I installed the painted body, I put carpet in the trunk.
I highly recommend doing it this way. Installing the carpet with the body installed would be much harder.
Finished trunk (after the body was installed):
I made a bracket to hold my spare tire out of a piece of 3/16" thick
steel.
|
