Our Location

TORQUE THRUST CENTRAL

AMERICAN RACING - TORQ THRUST

FULLY POLISHED 14X7 ROUND SPOKE

by AMERICAN RACING

I have listed the sizes and back spaces for

" American Racing "

Torq Thrust wheels below.

* * * * * *
Front or Back space is important because of clearance in the wheel well.

Knowing offsets does not help all the time. Having the space measurements and tire bulge does.

* * Measurements are taken from brake drum

mounting surface to outer lip. * * front or back * *

* * * * * * * * * * * *
AMERICAN RACING 60's Original * ALUMINUM * Straight spoke

SIZE FRONT BACK OFFSET

14X6.....3 1/2...........3 1/8......."O"

14X7.....4 5/8...........3 3/8.......1/2"....POS

15X6.....4 1/2...........2 1/2.......I".........POS

15X7.....4 3/8...........3 1/2.......1/2"....POS

15X8.5..3 1/2...........5 7/8".....1 1/4".POS

FULLY POLISHED POINTED SPOKE

14 x 7 AMERICAN RACING

American Racing * cast in back

* * All Original 60's American Racing Torq Thrust wheels had rim size and off set stamped / embossed / cast into back of each wheel.

* * If it does not say American Racing in back of your aluminum wheel.

.............THEN its not American Racing ! ! !

Bolt patterns* *

Using the method like in the picture :

"Measure Bolt Patterns"

5 on 4 = 2- 5/16 "

5 on 4.5 = 2- 5/8 " Common - FORD

5 on 4.75 = 2- 3/4 " Common - CHEV / GM

5 on 5 = 2- 7/8"

5 0n 5.5 = 3- 1/4"

This meathod gives you an accurate measurement. If you find that the wheel you are measureing does not give you these numbers then take a close look at the holes to see if they are worn or someone has taken a file to them.

Over the years I have seen a lot abuse because of wrong style / too long / loose lug nuts and attemps to uni lug wheels.

Measure holes out side to In side

Measuring center to center is not as accurate

Email me with questions and pictures terry@torquethrustcentral.com