|
5HP Sawstop Cabinet Saw with 52" Sawstop T-Glide Fence. Added ball bearing tool chest on laminated shelf, Mast R
slide 7500 sliding table and PSI Overblade Dust Extracion Hood.
43-460 5Hp Delta 1 1/4" Spindle Shaper with 43-851 1hp Delta Power Feeder and 43-812 Delta Shaper CI and Aluminum Fence
"RouterStop" - A Milwaukee 5625 Router in a Woodpecker PRL Router Lift installed in a Woodpecker 32"X53" table
on a steel frame I built. Router fence is the 25" Incra LS Pro Fence assembly. Frame is steel from computer server racking.
Added two ball bearing tool chests on a laminated shelf. Also added downdraft dust collection via a Woodpecker router dust
cabinet. Below dust cabinet is a Ring Master concentric ring tool. Mounted a Dewalt 734 12.5" lunchbox planer on
a riser above the fence. Have also installed a vise and an anvil on the cast iron table end.
Delta 12" DJ-30 Jointer. 3HP 3phase powered by a FM50 AC Drive/VFD running on single phase.
Delta DC-580 22-451 5hp 20" Single phase planer. Added the digital height gauge to improve thickness readings. Base is
the HTC HDC-580 mobile base made for the DC-580 planer.
MiniMax MM20 Bandsaw - 20" throat and 20" resaw capacity. made in Italy. Powered by a 4.8Hp motor. 756lbs. Greatlakes
caster's leveling casters have also been installed.
8' JLT Panel clamp rack with 18 40" steel clamps. Clamps can be used on each of the 5 levels. JLT Panel Flatner will
flatten up to 40" 6/4 stock. On the back I have added a Kreg Klamp, and a Kreg Foreman.
Grizzly 1066Z 26" Double Drum Sander. Powered by a 5hp motor. Includes Wide Belt Sander style industrial converyor belt.
Laguna Platnium Horizontal Slot Mortiser with added air clamps. The aux table raises the workpiece high enough to allow
mortising 3/4" material.
Leigh FMT with a dedicated Bosch 1617 plunge router. Makes tenons like I have never seen before. I have also added the
vertical motise and square tenon templates to this setup.
Festool ETS 150/3 Random Orbit Sander. Vibration is very minimal with this ROS. Hope to get a CT22 Extraction unit soon.
For now I will use it with my shopvac and a fein hose adapter.
Hitachi 12" Sliding Compound Miter Saw with digital readout for bevel and angle and also a laser blade marker. Installed
on the awesome Gravity Rise Bosch T4B Miter Saw Stand.
CapSpray CS9100 HVLP 4-stage Turbine. Just learning how to spray and a friend sold this unit to me now that he moved
on to a Kremlin. This is supposed to be an excellent HVLP system.
Jet 13" Planer/Moulder. purchased to be a dedicated moulder in my shop as there are two other planers. Currently I own
4 sets of moulder heads - two crown and two chair rail.
Jet JFM-5 1Hp Hollow Chisel Floor Mortiser
For sale Powermatic 701 Hollow Chisel Mortiser on Powermatic Stand. Chisels, mobile base, light, etc. not included
Puma 6hp 60 gallon compressor. Vibration Isolation Feet have been installed. Porter Cable regulator has also been installed.
Delta 5hp 50-903 Cyclone 2-stage dust collector - soon to have duct work installed.
Delta 5hp 50-854 4800CFM Single Stage Dust collector - interim until cyclone is installed.
John Deere 3320 with 300X loader and 72" 7-iron mower.
|
