MINING AND TUNNELING MACHINERY TITAN_1 The TITAN-1 is designed to mechanize the stowing operations in seam development drifts following the face. The machine is used in coal mines regardless of gas and dust concentration, with the stowing of waste rock in adjacent spaces. Parameters Minimum finished cross-section, m2 7 Support any Finished section height above the railhead, mm, max 2200 Wall rock breaking lower, upper, combiner Seam thickness, m, min 0.5 Angle of the seam bedding, degrees, max    - while working to the dip 25  - while working to the rise 10 Ultimate strength of rock σcomp, MPa, max 100 Rail gage width, mm 600 and 900 Voltage, V 660 Output, m3/min 0.33-1.00 Rock conveyance range, with two bends and the 2 m-rise of the route, m, max 80 Stowing pipe nominal internal diameter, mm  170 Compressed air flow rate, cu.m/min, max  70 Stowing pipe diameter, mm  145 Overall dimensions, mm, max:    - TITAN-1 crushing and stowing machine 4175o~1450o~1950  - VP70 type air-blower 2380o~1250o~2220 Mass of the crushing and stowing machine, kg, max 27800 The plant’s design bureau is capable to work out and complete machines also with other equipment depending on customer demands