|
|
HomeWHAT'S NEW?Ace McCoy's TrainerAichi D3A1 'Val'Brewster BuffaloChilton DW.1Curtiss SB2C HelldiverCurtiss SBC-4 HelldiverDouglas SBD- 3 DauntlessFairchild F24 C8AFairchild PT-19Grumman TBM AvengerGrumman G-23 "Delfin"Hawker Typhoon Mk 1BHeath MidwingHoward GH-2 NightingaleKocherigin - Gurevich TSh-3Laird Super SolutionLockheed OrionMitsubishi J2M3 RaidenMitsubishi Ki-30 "Ann"Nakajima Ki-84 "Frank"North American O-47ARepublic P-47N ThunderboltSolar MS-1Sopwith PupSopwith TriplaneVought OS2U KingfisherVought SB2U VindicatorWaco SRE
|
Enter content here 8.10.09:
Started engine cowl piece. The kit includes the side formers w/ 'jigs' attached for
proper alignment. The cap former gets attached, then the remaining 1/16" strips are added.
8.07.09:
Fuselage stringers added.
8.06.09:
Began adding cap strips. I'm running the strips front to back so they span the center spar of
the stab (and rudder) and hopefully create a more rigid structure.
I also finished building the main fuselage frame.
8.04.09:
Finished the tail feathers. I'll be adding 1/32 x 1/16 cap strips to top and bottom.
8.02.09:
This is the Easy-Built laser cut kit of the Lockheed Orion. It's based on
the 24" span plans by Tom Nallen.
For the complete line up of Easy-Built kits, you can visit their website at:
http://www.easybuiltmodels.com/
|
Enter supporting content here